For a beautiful manicure, how to apply glitter to shellac becomes a must-have knowledge. It is unlikely that a representative of the fair sex will argue with the fact that rhinestones and sparkles look really interesting and decorate any nail design. It is also important that sparkles are a universal decor that can easily suit almost any look. In this case, you can eliminate the need for jewelry, in particular, rings and bracelets. The handles will look sophisticated and elegant even without this.
It’s worth learning how to apply glitter to shellac before you start doing your own manicure. This will avoid possible mistakes and guarantee a truly luxurious design. However, it is still recommended to act carefully so that the image does not become vulgar. The mesmerizing design may differ in color scheme and specific placement of sparkles. But in any case, you will definitely like it.
Algorithm correct application sequin
Don't worry that you won't be able to apply the glitter yourself. The technology is simple and does not have any pitfalls, especially if you adhere to the algorithm of actions. It is worth preparing the equipment in advance, without which it will be impossible to create a manicure with shellac. So, you will definitely need:
- UV lamp required for drying.
- A special liquid to remove the sticky layer.
- Several natural bristle brushes. They should have different sizes so that you can choose the most preferable one.
- Files that differ in fractions and shape.
This is a basic set of tools, without which it will be impossible to create a manicure with shellac. After everything is prepared, you can proceed directly to the process of creating a luxurious nail design. So, the operating algorithm is as follows:
- Preparing nails for manicure. To do this, remove the cuticle and straighten the shape of the nail using a natural nail file if this is your first time doing a manicure with shellac.
- Removing the fat layer from the nail using a buff.
- Applying base coat. It is thoroughly dried in a UV lamp.
- Apply the base color in two layers, drying each nail in a lamp before applying a new layer. After applying the second coat, leave it tacky.
- Apply glitter using a brush. To do this, dip the brush into glitter and smoothly sprinkle the glitter onto the nail. It's best to do this slowly so you don't apply too much.
- Dry your nails in a UV lamp.
- Apply topcoat.
- That's all. Glitter nail design is complete.
We select an interesting manicure option
Shellac opens up wide possibilities for choosing nail designs. There are quite a lot of methods, so you will definitely be able to choose the one that suits you best. So, very often shellac is chosen as an independent coating. Its application is not difficult, but it is important to remember the need for degreasing and preliminary preparation of the plate. The process itself involves further applying a base coat, drying, applying a base coat, applying glitter, drying, and fixing with a topcoat.
Also, shellac often represents an additional decorative design, for example, a French coat. In this case, colorless or with natural color nail plate base coat. Next, shellac is applied to the edge of the nail, creating a design - a French manicure. In this case, additional decorative elements are broths, colored sand, and rhinestones. They can be placed either under the gel or on top of it.
Lunar and geometric manicure - a tribute to fashion
Luxurious modern version stands for lunar manicure. For this, you will have to additionally use limiting stencils. They are glued to create the preferred shape, and the coating is dried. You can also take a closer look at the auxiliary decor - slider, lace, glitter.
Another fashionable innovation is geometric manicure with glitter. Many people call it nothing more than a work of art. You can also take a closer look at manicures with a metallic effect. If you are interested in how to apply glitter to shellac, you should immediately decide on the design. Only after this should you read the instructions for applying the gloss. The principle depends on the design. You will be pleasantly surprised by the glitter manicure and will probably want to repeat it again.
A manicure with glitter looks very elegant. This nail covering is suitable for an evening outfit, ideal for New Year's Eve, or can simply be the highlight of an everyday look. Shellac has long replaced its traditional counterpart due to its increased resistance to external influences. The manicure lasts for at least two weeks, the color does not fade, does not crack and pleases with a dazzling gloss.
Shellac can contain glitter, which is very convenient and economical - no need to buy additional consumables. On the other hand, the monogel goes well with separately purchased shining sand, this allows you to combine colors in any variations and your imagination has no limits. In the photo you can see the types of manicure - an exquisite French manicure with sparkles and a plain coating with a pattern.
Navigation:
Required tools and materials
This service has long gone beyond the scope of salons; it can easily be done at home. To do this you will need:
- shellac with glitter or materials separately;
- files;
- base and top coat;
- special liquid for removing the sticky layer;
- UV lamp (recommended power 36V).
It is important that all the elements are present, since if there is no base or degreaser, the shellac design with glitter simply will not stick and will come off like a film on the second day.
What do we need
Finger separator
If you are getting a pedicure
Sold in any themed store. For example, "Girlfriend".
Every lady has one
You can't do without them.
Regular manicure
The main condition is that they are sharp and do not break your nails.
For cuticle
Don't neglect them
Orange
For cuticle
For nails
Choose any
Napkins
Lint-free
Regular ones won't do
Liquid
For removing shellac
Sold individually or as a set
Means
For degreasing
And removing the sticky layer
Bath
You can find an alternative
Available in sets and separately
Shellac application technology
Memorizing the algorithm step-by-step execution procedure once, it will be easy to create a beautiful French or single-color coating.
The nail coating must be carefully prepared before applying shellac with glitter. To do this, remove the cuticle, trim the edges with a nail file and remove the gloss using a buff. The last step must be performed carefully so as not to accidentally saw through the plate. This is fraught with adverse consequences - premature detachment of the product, severe thinning of the nails, which will grow brittle; Micro wounds can become infected. Having done such a manicure, a woman will get more problems than benefits.
Further steps step by step:
- applying base and drying nails under a lamp;
- coating with colored shellac with sparkles;
- applying the finishing coat.
This technology is used if the shellac already contains glitter of various sizes and shapes.
The question is how to do it beautiful manicure, if the supporting materials are purchased separately, has a simple answer and is not difficult even for a beginner. The first layer of color coating must be completely dry, the second layer must remain sticky. You need to carefully dip a brush into a jar of glitter and shake off the required amount of shining elements onto your nails. All layers are thoroughly dried and only after that the finishing coat is applied.
Knowing how to apply glitter to shellac, this procedure can be easily performed at home, saving on the services of a professional. The video shows an example of how to liven up a French jacket with delicate pink sparkles.
Design options for beginners and more
How to apply shellac with glitter on your nails is only the first stage of learning simple manicure techniques. Just making a chaotic drawing is trivial, this option is suitable for 1-2 times. Next you will want something more sophisticated and beautiful. Interesting glitter nail designs:
- golden or silver elements are applied to the colorless base on the edge of the plate - you get an unusual jacket, as in the photo;
- lunar manicure with shellac with glitter involves drawing a smile line at the base of the nail (limiting stencils will be required as additional materials);
- nail design with gradients (use as many shades of the coating as possible, harmonizing with each other).
After looking at various color combinations and how shellac with glitter is made in the photo, you can safely experiment at home.
What rules should you follow?
Designs in pink, lilac or peach tones are perfect for summer. Sequins on this background go well with light silk clothes. Rich colors (blue, purple, red) are classics of the genre for late autumn and early winter.
For young romantic girls, craftsmen recommend warm pastel colors of shellac with sparkles (any design can be turned into reality, making it truly unique). When preparing for a special event and pursuing the goal of being the most attractive so that they will pay attention to her at the moment, a woman often chooses burgundy, plum and dark brown tones. By covering her nails with shellac and glitter, she creates a harmonious manicure with many shades of clothing.
To keep your hands beautiful for as long as possible, it is important not only to know how to properly apply shellac with glitter and make a unique design. It is necessary to follow the technology and try to protect the coating from external influences (chemical and mechanical). The photo shows a selection of shellac with glitter different types and sizes are great ideas that can be modified at your discretion.
A modern fashionable look or image can be described in one word – not boring. Bright sparkles, which have always been an inseparable part of manicure, first migrated to the eyes, and now to the lips. And if you previously used gloss or lipstick with shining elements, then Today fashionistas simply sprinkle themselves with glitter from head to toe. But manicure is not inferior to the palm and dictates the rules of brilliance in both design and jewelry.
Specifics of applying glitter to gel polish
Different types and sizes of glitter require different application techniques. From regular polishes to gel polish with glitter differs in that it contains glitter separately, varnish – separately. And if earlier fashionistas rejoiced when they grabbed a new bottle with shimmering mother-of-pearl, today everything is sold, as they say, for spare parts.
Glitter is often called a beautiful word glitter (translated from English - sparkle). Glitter has found application not only in manicure, it respected and used by makeup artists and decorators, well, in nail design this is generally a classic of the genre. Today the new products are already well known - sparkles with a 3D effect and a “chameleon”.
Benefits of manicure with glitter and gel polish
What is needed for the technique of applying glitter to gel polish
The glitter itself is applied different ways. First you need to decide on the design, purchase the necessary sparkles and additional gadgets:
Step-by-step instructions for applying different types of glitter
First you need to prepare your nails for colored gel polish. Carry out the entire procedure for preparing the nail plate, degreasing, applying a gel base and drying it in a lamp. Cover your nails with colored gel polish twice, dry them in a lamp, and only after that you can proceed to the stage of applying glitter decor.
Apply very fine glitter (dust) using the sprinkling method
- Apply a layer of clear gel to your nail.
- Place your finger over a small container.
- Scoop up fine glitter with a small spatula and sprinkle the nail generously and evenly. Fallen glitter can be reused.
- When you realize that you have achieved desired effect, wipe off any remaining glitter dry fan-shaped brush.
- Dry in allotted time And cover with finishing gel.
This method is quite wasteful and is not often used by craftsmen. But still he more rational than the method in which it is recommended to simply lower the nail with a wet coating in a jar of glitter. In this case, you are not guaranteed high-quality and uniform coverage.
- Dried in a lamp Do not wipe the colored layer with a napkin so as not to deprive the nail surface of the sticky coating.
- Dry use a brush to pick up dry glitter and apply it to the nail with soft patting movements. Carefully cover the entire surface.
- When the entire nail is tightly covered with glitter, use a rubbing motion to drive in the decor. into the gel and at the same time remove the remaining glitter. Use a dry brush to brush away all unnecessary dust particles.
- Place in the lamp for a few seconds, cover with finish and dry it thoroughly.
You can apply decor using this method if you want to cover the entire nail with glitter or create a gradient. Basically, the finest glitter dust comes in two variations - with a silver and gold shine.
The figure shows step-by-step instruction About, how to apply glitter to gel polish using the dry brush method.
- Drop a small amount into any container transparent modeling gel.
- Pour enough glitter into the middle of the gel for the intended design. Stir vigorously until a homogeneous consistency is obtained. If the shine doesn’t seem to be enough, you can always add more glitter. You need to make such a mix taking into account the design for all nails, otherwise it will be difficult to guess the consistency later.
- Place the resulting mixture on a decorative brush and decorate your nails. Draw patterns, cover the entire nail or highlight some decorative details.
- Dry in a lamp cover with finish and dry again.
This application is convenient for hand-drawn designs. With shiny gel you can create any patterns and decor, beautifully emphasize or duplicate the smile line, or paint over the nail hole. To cover the entire nail It is better to choose a small flat brush. In any case, some amount of the resulting solution will have to be thrown away, but this method is still more economical.
The brush used to apply the decor must be thoroughly wiped if you use different types sparkle. At the end of working with glitter, thoroughly clean the brush again so that any remaining glitter does not spoil the next design.
Apply large glitter to the nail
It is better to think through the design with large sparkles in advance. The chaotic arrangement does not look very elegant, and large decorative details are quite difficult to correct without damaging the manicure.
- Apply to color coating transparent layer of modeling gel.
- Using a dots (special tool) transfer glitter or sequins one at a time from the jar onto the nail. It is better to first pour a little glitter onto a flat surface - this makes it easier to select.
- Convex sequins Easier to carry with a magnetic pencil. It looks like a regular pencil with a white lead, but is able to attract and hold small sparkles.
- For large shiny elements, finishing the coating must be applied in a sufficient layer to cover the volume of decor. Otherwise, the corners of the glitter will begin to bend and ultimately ruin all the beauty.
- Dry the gel finish in a lamp.
How to apply large ones correctly glitter on gel polish using a magnetic pencil, look at the photo.
Video on how to apply glitter to gel polish to get a shiny effect
In the video, the manicurist shows how to get interesting decor using different techniques. A “sugar nail” design (with a coarse-grained rough coating structure) is made on three nails with identical glitter and “rubbed” with glitter onto different substrates (mirror coating). The work is carried out with transparent sparkles with a “chameleon” effect.
Gel polishes with glitter- a great way to be the center of attention at a party, disco or gala event. They will reflect the festive mood, drawing eyes to the beauty of the hands.
Advantages of gel polishes with glitter
A manicure with glitter will add the desired zest to your look. Depending on the chosen coating, you will achieve a different effect.
Shellacs with large sequins - an option for a noticeable outfit chosen for a special occasion. The concentration of glitter in the bottle is not so high, and as a result, only a few sparkling particles can fit on the nail, but how bright it is!
Gel polishes with micro-shine are a discreet solution. They will emphasize the elegance and style of the image. There will be a lot of particles on the nails, but the soft shine will allow you to leave a coating for everyday wear. will stay on your nails in excellent condition for a long time (at least two to three weeks).
Product presented inonline store FRENCHnails
You will be impressed by the luxurious series shellacs with glitter:
- Vegas by Grattol, which paints the lights of Las Vegas on nails with iridescent mica;
- Glitter from TNL, giving a glamorous shine;
- Platinum from F.O.X., impressive with a noble steel sheen.
With us you can inexpensively buy gel polish with glitter for every taste! When looking at the palette, my eyes widen. INonline store catalogFRENCHnails are: graphite and silver, lilac and peach-orange, light gold and brown, emerald and ultramarine shades. The size of the glitter varies from large glitter to micro glitter.
Great prices - another reason to choose FRENCHnails. You are also given the opportunity to select and purchase other products that you will need to decorate your nails, including UV and. We work directly with the manufacturer, so our product costs are much lower. We also run various promotions on our website, thanks to which you can purchase even cheaper.
Treat yourself and those around you with gorgeous nails!
Have you been dreaming for a long time about the perfect manicure that can last on your nails for more than two weeks? And yet there is simply no opportunity to spend money on an expensive procedure in a beauty salon? Well, we will tell you how to apply shellac at home so that it lasts a long time and at the same time looks beautiful and attractive. In addition, if possible, we will try to replace expensive drugs with products that are more affordable for every woman.
What type of manicure is this?
Shellac, or gel polish, is a special coating for nails that can last 2-3 weeks. Thanks to the special formula, which significantly distinguishes this product from standard varnish, it does not scratch or break. It gives natural nails strength and flexibility at the same time. In turn, the gel coating protects the nail plate from harmful effects. environment, which has a beneficial effect on her condition. Every girl can learn the art of how to apply shellac on nails. To do this, you only need to purchase a series inexpensive means, which we will talk about below, and tune in to positive result your works.
Some nuances
Before carrying out this procedure, you need to find out exactly how to apply shellac correctly. If the process is carried out in the wrong sequence or any mistakes are made, the gel coating may become deformed, as a result of which it will not adhere properly to the nails. The procedure itself is conventionally divided into three stages: applying the base, the coating itself and the finishing fixer. We also immediately note that you can achieve a different color effect using shellac varnish. How to apply is one thing, but how many layers you get will affect the intensity of the tone. If you apply the coating in one layer, then only a mysterious shade will remain on your nails, translucent and very delicate. Two coats will give a more saturated color. Also important is the use of oils and creams. Even one drop of such a substance can reduce all the qualities of the gel coating to zero. Therefore, the day before applying shellac, you should not treat your hands and nails with similar substances.
Preparing nails for work
No coating, even the most miraculous one, can hide uneven nail shapes, overgrown cuticles and other imperfections. Therefore, before applying shellac at home, you need to give your nails a shape and also make sure that they are all the same length. Then, using a wooden stick, we move the cuticle to the base of the nail and trim it with a hatchet. Please note that all these operations must be performed on a dry nail. Do not use water, oils, or any creams or moisturizers. Now we polish the nail plate with a regular nail file. As a result, it should become rough - this way the gel will adhere better and last longer. Now we remove the dust formed during polishing and treat the nails with antibacterial liquid.
Degreasing nail plates
Immediately before applying shellac, it is necessary to thoroughly degrease your nails so that the gel coating lays on them more firmly and lasts a very long time. To do this, you can buy a special product called bonder gel. You can apply it to each nail using an ordinary nail polish brush, but the main thing is not to overdo it. The layer you put on each nail should be as thin as possible. After this product dries, a slight matte sheen should appear on the nails. If your nails become oily, it means that you applied too much gel. You can remove it with a napkin or a few movements of a sanding file.
Initial procedures
Now we will specifically look at how to apply shellac correctly. The first step is to cover the nails with a colorless base gel. It should be applied in a layer that is not too thin, but not too thick, and immediately after treating the nails with a bonder. This first layer must be dried under an ultraviolet lamp for 20-25 seconds. After this, a sticky dispersion will appear on the nails. Under no circumstances should you remove it, and in order to fix it, your nails need to be dried again in an LED device. This procedure can last no more than 10 seconds, after which the nail plate will become even, smooth, and acquire a glossy shine.
Application of color coating
In order for your gel manicure to last you a long time and retain its beauty for two or more weeks, it is important to choose a quality product. Bluesky shellac is considered affordable and at the same time very reliable. Both applying it to nails and removing it are quite easy, besides, it is evenly distributed over the surface, dries quickly and does not deform. You need to paint each nail plate with a thin layer, using the brush that is in the bottle.
The layer of gel colored varnish should be as thin and uniform as possible. This procedure should begin with the little finger of the right hand, after which this finger is dried under an LED lamp. This is followed by the little finger of the left hand, then the ring finger of the right hand, then the left and so on. That is, we start with the fifth finger, alternately painting the right and left hand, and finish with the first. This will allow the varnish not to spread when you tilt your hand, and not to get on the skin and cuticle.
Achieving a more saturated color
If you want your nails to be lightly coated with varnish, and it shimmers with only a slight tint, then one layer of gel nail polish will be enough. In order for the color to become much more saturated, regardless of whether you use scarlet, dark cherry or beige, you need to apply a second coat. In this case, shellac is distributed over the nails in the same way as the first time - in a thin, uniform layer. We begin to paint again from the little fingers of both hands, gradually moving towards thumbs. Only now, each time you dry a separate nail under an ultraviolet lamp, you need to ensure that the exposure time is at least 40 seconds. This way, the second layer of gel coating will attach more securely to the nail plate, adhere better to the first and last longer.
Final procedure
Now the nails are treated with a transparent gel layer, which not only covers all the previous ones, but also paints over the end of the nail. After the fixative gel is applied to the fingers, it must be dried under an ultraviolet lamp for 40 seconds. After this, a sticky layer forms on the nails, which must be removed. For this, ordinary cotton swabs are used. One sponge can be used on three nails, no more. The excess sticky layer of gel that remains on the cotton can scratch the rest of your nails and make your manicure dull. Also, in order to soften the cuticle after a dry manicure or after exposure to a huge amount of ultraviolet light, you need to drip oil on it. This can be any oil solution, scented or not. It is best to buy it at a pharmacy.
Picturesque manicure masterpieces
Using the technology of applying gel polish, you can create any design on your nails. This will be done in exactly the same way as with conventional varnishes, only after each new layer the nails will have to be dried under an ultraviolet lamp. Well, let’s briefly look step by step at how to apply a design to shellac. First, we prepare the nails for the procedure, trim the cuticle, even out the shape, and cover it with a gel base. Now apply the base color in one or two layers, as described in the instructions above. When the colored varnish dries, we begin the drawing. It is also advisable to make the sketch with gel polish so that it does not fade against the background of the main coating. After your patterns are ready and dry, cover them with a fixative. Then we do everything as in the usual procedure.
Let's shine
The use of glitter or simple sparkles is now very common among young people. Often this decorative element is also present in manicure. It doesn’t take much time to figure out how to apply glitter to shellac. It is only important to understand the previous instructions, and based on it, add various accessories. So, after the nail is processed and covered with the first transparent gel layer, we apply a colored base to it. After this, mix a small amount of the same colored varnish with glitter, apply the mixture as a second layer. We fix it all with a transparent gel, not forgetting to dry it. A similar technique can be used on all nails, or you can come up with a more interesting design.
