When the cold weather comes, everyone strives to quickly warm up, but at the same time look beautiful and fashionable. For several years now, hats with various patterns have remained in fashion. Beautiful designs change and improve every year, and therefore it is sometimes difficult to keep track of trends. But basically the patterns come from ordinary braids, where you need to know how to make a binding. It's not difficult, but you need to have patience and be careful. A hat with a braided pattern is very easy to knit, but at the same time it looks beautiful, rich and is quite warm.

Even someone who is just starting to knit can handle this pattern. At first glance, it may seem that such drawings are complicated due to their binding, but if the scheme is described in detail and the beginner sticks to it, then the result will be excellent.

Decorate with a fur pompom

The braided hat is very beautiful and light, but at the same time keeps you warm. Due to this pattern, the product holds its shape for a long time and at the same time appears more voluminous. In this master class we will look in detail at how to knit a hat with a weaving pattern, and with the description the task will seem easy and even a beginner will be able to cope with it.

What we need to prepare:

• thread "Pechorda" 50 g;
• knitting needles number 4 and 6;

Now let's start knitting. To do this, we cast on 120 buttonholes and 2 more edge buttonholes on the knitting needles, it should be 56 cm if you knit a double elastic band. 1st row: you need to remove the edge buttonhole, * front buttonhole, remove one buttonhole without knitting it, purl, remove another one * but the edge buttonhole should be knitted purlwise.

2nd row: remove the edge buttonhole, * front buttonhole, one must be removed without knitting, purl, remove the next one and not knit it * - repeat this until the very end of the row. Again, knit the edge purl.

It is important that in this row it is necessary to knit those buttonholes that we did not knit in the first one. The height of the elastic band should be 6 cm.

Now we switch to number 6 knitting needles, which we will use to knit the pattern. Once the elastic is knitted, we add 12 more buttonholes for a total of 134 buttonholes. Let's start knitting the pattern.

1st row: we knit with only front buttonholes. 2nd row: now we knit with purls. Next, we knit the 3rd-5th rows with knit stitches, and knit the 4th and 6th rows with purl stitches. 7th row: knit the edge buttonhole, * transfer 4 buttonholes to an additional needle and leave them in front of the product, then 4 knit buttonholes, after the 4 buttonholes that were transferred, you need to knit them with knit buttonholes. 8th row: knit purl stitches. 9th row: we knit the front buttonholes.

Now we alternate rows up to 12. Already from the 13th row we need to start everything from the first row. We make a row of elastic 2 by 2. This will make 13 cm. Next we need to make decreases after the pattern: knit 2 knits, purl, now we combine two buttonholes, only knit purl. Elastic band again, height 1 cm and decrease the buttonholes: we knit all the purl buttonholes, two together, but after a row we combine the two front buttonholes, and on the next row we knit them on the front side, we knit two together through one buttonhole. The decrease continues for 5 cm. We pass the remaining buttonholes through the thread and tighten them, and pull the remaining thread to the wrong side. Then we take a fur pompom and sew it to the hat, and now our product is ready, you can wear it.

According to fashion trends

This hat is very fashionable, in addition, the designers assure that this model will also be in trend this winter. Usually branded items cost a lot of money, so many needlewomen, saving their money, knit such items themselves. Things you make yourself are more valuable, especially since you can add something of your own, then such a headdress will become completely unique.

What you need to prepare:

• semi-woolen threads;
• knitting needles number 4 and an additional knitting needle;
• scissors;
• needle.

For a head circumference of 56-58, cast on 70 buttonholes on circular knitting needles. Now we knit a regular elastic band 2 by 2 14 rows. When the elastic band is knitted, we must knit 3 rows with front buttonholes, while adding 24 loops. The pattern below shows the knitting pattern for the pattern. In this case, we remove three buttonholes onto an additional knitting needle in front of the product. We knit three loops, and then we knit three buttonholes from an additional knitting needle. And so we knit the entire row. Next, we knit 5 rows with facial buttonholes. And then we make the binding on the other side.

After the second crossing, the pattern will become clearer. And so we knit to the required height, approximately 15 cm. And only then we begin to make decreases. During the binding period, using an additional knitting needle, we make a reduction behind the product. And after 5 rows you need to remove them from the main fabric. After that we knit a few more rows, and then knit 2 buttonholes together for 5 rows. At the moment when there are only 12-18 buttonholes, use a thread to tighten everything and pull the remaining thread inside the hat. All that remains is to sew the hat with the same thread, and everything is ready.

Very warm knitted “Braided” hat with a large pompom on the top

Warm hat knitted

Details of how to knit a warm hat with knitting needles from Gretchen Tracy

Materials: Patons Classic Wool yarn (100% wool, 100 g/192 m), circular knitting needles 3.75 mm, circular and double needles 5.0 mm.
Knitting density: 20 loops = 10 cm wide.

2 persons together. right: insert the right needle into the second, then into the first loop of the left needle and knit them together. behind the front walls.
2 persons together. left: remove the loop, knit 1, throw the removed loop over the knitted one.

Cross the loop to the right: knit 2 loops together knit to the right, but do not remove the loops from the left knitting needle, insert the knitting needle behind the knitted loop again into the first loop and knit it again, slip two loops from the left knitting needle (or slip a loop on an additional knitting needle at work, knit 1, place the removed loop over the knitted one).
Cross the loop to the left: skip the first loop, knit the second loop behind the back wall (do not remove two loops from the left knitting needle), then knit both loops together. behind the back wall (or remove the loop on an additional knitting needle before work, knit 1, knit 1 knit from an additional knitting needle).

Warm hat with knitting needles, job description:

Using smaller needles, cast on 104 stitches.
Join in a circular row, placing a marker at the beginning of the circular row.
Knit in the round with an elastic band: * k1, * p2, k2, repeat from * to last stitch, p2, k1.
Continue knitting with an elastic band until the height is 4 cm.
Switch to large knitting needles.

Knit in pattern:
Row 1: K1, *P2, K2, repeat from *, P2, K1.
2nd row: *K1, P1, cross stitch to the right, cross stitch to the left, P1, K1, repeat from *.
Row 3: *K1, P1, K1, P2, K1, P1, K1, repeat from *.
4th row: *k1, cross stitch to the right, purl 2, cross stitch to the left, k1, repeat from *.
Row 5: K2, *P4, K4, repeat from *, P4, K2.
6th row: faces. loops.
7th row: knit as 1st row.
8th row: *cross the loop to the right, purl 1, knit 2, purl 1, cross the loop to the left, repeat from *.
Row 9: *P1, K1, P1, K2, P1, K1, P1, repeat from *.
10th row: *P1, cross stitch to the left, k2, cross stitch to the right, P1, repeat from *.
Row 11: *P2, *K4, P4, repeat from *K4, P2.
12th row: knits. loops.
Repeat rows 1-12 for the pattern three times, then start decreasing:
Decrease row 1: *k1, p1, k2tog. to the left, knit 2 together. right, p1, k1, repeat from *.
2nd row: *k1, cross stitch to the right, cross stitch to the left, k1, repeat from *.
Row 3: *K2, P2, K2, repeat from *.
Switch to double needles
4th row: *K2 together. right, purl 2, knit 2 together. to the left, repeat from *.
5th row: slip the first stitch unknitted onto the last needle (it will need to be knitted at the end of the row), *P2, k2tog, repeat from *.
Row 6: *P2 together, P1, repeat from *
7th row: purl loops.
Row 8: *P2 together, repeat from *
Row 9: P1, *P2 together, repeat from *
Cut the thread, use the end of the thread to thread the last loops and pull them tight, fasten them on the wrong side of the work.

Many of us don’t like hats, believing that they don’t suit them, make our cheeks look round, and also ruin our hair. But experienced fashion bloggers know that stylish knitted accessories can not only make an image more interesting, but also give it a zest and personality. In addition, by changing only hats and scarves, you can create completely new looks each time with the same outerwear. But accessories are cheaper and take up much less space in the closet. There are often difficulties in choosing warm accessories to complement an elegant or casual wear, since knitted hats often look too sporty. To avoid getting into trouble, it is better to choose laconic models made from plain yarn, but bright, striped hats will also go well with sports jackets. Hats with an unusual braided pattern are guaranteed to fit into even the most feminine image. In addition, such a hat turns out to be very warm and will warm you even in the most severe frost.

We knit a hat with a braided pattern in a master class for beginners

• 190 g of plain yarn with a density of 110 g per 100 m
• circular knitting needles No. 5, length 40 cm
• sewing needle

The finished product is designed for a head volume of 54-56 cm.

Below is a diagram of the finished product.

1) Cast on 98 stitches on circular needles.

3) Let's move on to making additions. They can be made in one of two key ways: pulling loops from crossed broaches or knitting two main loops from one.

4) The number of additions depends on how tight you want the hat to be. If you prefer that the headdress “sits” clearly on the head, then we make additions every three loops. And if you prefer the hat to be looser, you need to add increments every two stitches. In this master class we will demonstrate the latter option. So, after making the additions, there are 146 loops left on the loops. If suddenly you want to make the hat even more magnificent, then additions must be made from each loop. So we have to connect 7-8 levels, and then we move on to the patterned part.

1) We knit the first level of the pattern like this: leave four loops on an additional knitting needle, knit the next four, and then knit the yarn from the additional knitting needle with knit stitches. So we continue knitting until the end of the level, and do not forget to mark the first stitch in the row with a marker.

2) We knit the next six levels with facial loops.

3) We knit the eighth level according to the pattern: we leave four loops on the additional knitting needle, knit the next four, and then knit the yarn from the additional knitting needle with knit stitches. So we continue knitting until the end of the level, and do not forget to mark the first stitch in the row with a marker.

4) We knit the next six levels with facial loops. That is, you can notice that the cross is located at every sixth level.

5) We knit the patterned part as long as the depth of the hat is needed. Next (about four to six centimeters before the end of knitting) we move on to making decreases. Below are step-by-step instructions describing how to do this.

1) After the last pattern row, we knit one level with facial loops.

2) First level of decreases: we knit two loops together in those places where the lower loops of the cross pattern are located. That is, we knit to the end of the level according to the pattern “four knit stitches, two purl loops together, two purl loops.”

3) We knit the second level of decreases according to the pattern: “four knit stitches, one purl loop together, two purl stitches together.”

4) We knit the third level of decreases according to the pattern: “four front loops, two purl loops together.”

5) We knit the fourth level of decreases according to the pattern: “two front loops, two purl loops together, one purl.”

6) We knit the fifth level of decreases according to the pattern: “two front loops, two purl loops together.”

7) We knit the sixth level of decreases according to the pattern “all loops two together with the front one” until there are 18-22 free loops left.

9) The stylish braided hat is ready, you can try it on!

We look at various popular options for braided hats

The hat can be knitted with different additions with a braided pattern; accordingly, the design of the product will depend on this. Popular options include the “two by two”, “three by three”, and “four by four” models. If you choose a larger number of increases, the hat will be more voluminous, with wide patterns. And if, for example, you knit according to the “two by two” pattern, the pattern will be more delicate.

Video on the topic of the article

You can see in more detail how the hat is knitted in the following videos. WITH step by step instructions from experienced craftswomen It’s easy to understand complex elements and easily cope with the manufacture of this unusual hat.

When knitting, a pattern reminiscent of weaving is created with the loops removed, not only before the work itself, but also after it. This pattern is called “braiding”, or knitting from strands. Knitting should be embossed. It is suitable for making not only small items, but also scarves, sweaters, etc.

The pattern is often used for knitting items such as cardigans, dresses, coats, and jumpers. It is also used when decorating yokes on the lines of the figure, imitating a belt and emphasizing our silhouette.

“Braided” is a universal relief and three-dimensional pattern: suitable for making various accessories: belts, handbags, scarves, snoods, gloves, mittens, blankets, etc. Many people like this knitting, looks good on sofa cushions and hats: relief and comfort create coziness and warmth. The versatility of this pattern allows you to create things not only for women - this pattern can be used to make both women's, men's and children's hats. If it’s late autumn or warm winter, it’s time to knit and wear a hat with a braided pattern with pleasure. As in the “braid” pattern, a “braid” can involve a different number of loops, the weave can be more or less frequent, depending on this the result is completely different type products, therefore, to make sure that the chosen scheme suits you, it is better to find a photo in advance, and better video with the finished product on the Internet.

After preparing the tools, the diagram is first made for a sample of 10 by 10 centimeters. Then we move on to our choice of yarn. Thin or rather thick yarn is not suitable for this pattern. It can be of any production, but must have an average thickness. You always need to focus on the number of meters in a skein weighing 100 grams.

To create a braided hat, we will need the following materials:

• Yarn called Alize “Lanagold” (or other wool yarn) of a certain color and thickness.
• Number 4 knitting needles and one auxiliary knitting needle for creating overlaps.
• Sharp scissors.
• Needle for work.

Description of the pattern for hats.

Knitting can be tight or not too tight. A small braid will always look impressive in different products. Accessories created using this pattern look very cute. It doesn’t matter how the pattern was made: knitted or crocheted. Knitted items will look good in any case very original.

Before you start knitting, you will need to take knitting needles, for example, medium thickness No. 3 or 3.5. They are suitable for making a medium-weight knitted hat and can be made of any material. The best ones are simple, not steel, but bamboo, wooden or Teflon knitting needles. Need to purchase auxiliary knitting needle the same size, and to knit a larger knitted hat we will need circular knitting needles on a fishing line.

To knit the pattern, you will need to knit eight rows as a sample. When knitting, groups of stitches will intersect, slanting to the right in one row and to the left in another row. The scheme contains knitting jersey with a series of purl and knit rows.

Before starting knitting, cast on the required number of stitches, for example, a multiple of six. In the process of creating a sample, we will have to monitor the tension of the thread. The scheme assumes making loops of the same size. A uniform line should be assembled from the knots under the knitting needle.

Calculation of sample per sample

Before production knitted product with a pattern in the shape of an interlacing you need to familiarize yourself with description of the circuit, to create which you will need to calculate the required number of loops.

• It cannot be chosen at random. To calculate a loop test, you will need to knit a sample with a side of more than ten centimeters.
• By creating samples for each type of yarn, you can make a simple 10 by 10 centimeter template (a square with a side of ten centimeters on a checkered piece of paper). The sample must be steamed and attached to the template, and then the loops must be counted horizontally and vertically. Divide by ten, then we get the amount in 1 centimeter of sample. The scheme changes according to rapport.
• The easiest pattern is considered to be a weave with inclined loops 2 by 2. They need to be cast in the amount of four plus two edge loops. The pattern is similar to the Aran track warp that is used to create scarves or other items. In order to make a sample of this pattern, you will need to cast on twenty-four loops plus two edge ones. The height of the repeat should be sixteen rows. Openwork path has the appearance of a complicated braid with side edges consisting of 2 loops. The center of the track is created by a discharged “braid”.

Description of a complex work scheme

After casting the required number of loops, we proceed to knitting the product. Take the knitting needle with your left hand and knit one row with knit stitches and the other with purl stitches. We create knit stitches in the third row (three stitches), remove the following stitches from the left needle onto another knitting needle for braids. Then they are placed at work.

On the left needle, knit three stitches. They can be knitted by throwing them on the left needle, or created on knitting needles for braids. Next, we repeat, removing the knit stitches and placing them behind the work, and then we knit them with the knit stitches until only three stitches remain. Well last action: knit three knit stitches again. If you understand this topic, you can understand that making a braided hat is not at all difficult.

Original warm hats, as leading designers suggest, will be in trend this season, so anyone who doesn’t want to spend money on a branded hat can knit it themselves. In this case you will receive a unique item self made, which only you will have. In addition, after you get tired of the hat, you can unravel it and knit something else.

Stylish knitted hat with pattern"confusion" or "network": (photo 1) looks very impressive, and due to the pattern it is dense and very warm. Well, it knits up pretty quickly, see our step by step description and a diagram.

Hat with braided pattern

So, to create it you will need:

We start, as usual, with a set of loops in 2 threads: (photo 3).

We cast on 70 loops (for OG 56-58 cm) and knit a classic elastic band: (photo 4) from 14 rows: (photo 5).

Then we knit 2 rows with stockinette stitch, adding 24 loops: (photo 6).

Let's start knitting overlaps. From now on we knit according to the pattern:

thus: 3 loops are removed on an additional knitting needle before knitting: (photo 7),

then knit 3 loops (photo 8),

and after that the loops are knitted from an additional knitting needle: (photo 9).

And so the whole row: (photo 10).

After this, you need to knit 5 more rows with satin stitch: (photo 11)

and overlap is performed in the other direction: (photo 12, 13, 14, 15).

After the second overlap, the pattern itself will “emerge”: (photo 16).

Then we start cutting the loops. To do this, at the moment of overlap, we perform shortening of the loops with an additional knitting needle (at work): (photo 18, 19),

and after 5 rows - from the main knitting: (photo 20, 21).

Next, we knit a couple more rows, and then we knit another 4-5 rows, each time knitting 2 loops together. Decreases are made only on the “face”. When the total number of loops is equal to 8-12 loops: (photo 22), collect them on the remaining thread and pull them tightly.

Then we sew with monofilament from the inside out: (photo 23).

Back seam: (photo 24).

The hat is ready: (photo 25).

Trying it on: (photo 26).