A warm and cozy sweater is one of the basic things in a woman’s wardrobe. You can knit a sweater using either light and delicate mohair, melange yarn, or warm wool yarn. Sweater models are very diverse. Women's goes well with skirts, trousers and jeans. Knitted sweaters for women with knitting patterns and a description of knitting can be found in our article.
Women's mohair sweater with cowl collar with diagrams and descriptions
This very beautiful model of a women's sweater is suitable for a girl, a young woman, or an older woman. The color can be chosen to suit your taste. We will now tell you how to knit a sweater for women of this model.
You will need:
- 350 gr. mohair (50g./250m.) – knit in two threads;
- knitting needles No. 3 and No. 5.
Size: 46/48.
Knitting density: 16p. x 19r = 10 x10cm.
Knitting technique: we knit a wave pattern in accordance with the diagram. Inside out yarn overs in purl knitting pattern. Repeat from rows 1 to 36. 
Description
We start knitting sweaters for women from the back. On the sp. No. 3 we cast on 83 pets. We knit the first row like this - 1 edge st., 3 l.p.*10 i.p.+3 l.p.* 4 times. Then we knit like this – 1 cr.st., 3 sts. purl stitch before rapport, *13 sts + wave pattern* five times, 1 cr.st. There should be six repeats in one row. The armhole is knitted like this - in the 93rd row we close off 5 loops on each side. Then cast off 2 stitches in every second row. 2 times, 1 loop twice. There should be 61 loops left. We continue knitting until row 136. Then we close all the loops.
We knit the front part of the sweater in the same way as the back. Only at 116 rubles. We begin to design the neck. To do this, you need to close the middle 13 loops and close 2 loops on both sides of these 13 4 times in every 2nd row. There should be 16 loops left on each side. In the 136th row, close all loops.
Let's start knitting the sleeves. Both sleeves are knitted in the same way. We cast on 44 loops. We knit the first row in the following way - 1 edge st., 3 lp*10 i.p+3 lp* 2 times. Then we knit like this - 1 cr.st., 3 sts. purl stitch before rapport, *13 sts + wave pattern* 2 times, 1 cr.st. There should be three repeats in one row. To expand the sleeves in the 10th r. From the beginning of the work, make an increase in the 1st stitch on both sides, and then every 10th row, increase the 1st stitch. 6 times. There should be 58 stitches on the needles. In order to get a sleeve roll, you need 84 r. make decreases - close 4 loops on each side, and then close every second row 1 time for 1 loop, nine times for 1 loop, and four times for 2 loops. There should be 12 loops left. At 114 r. close the loops.
All that remains is to assemble and tie the neck. Sew the sides and shoulders. Then we sew the sleeves and sew the sleeves into the armholes.
We knit a sweater with a collar. To knit it, you need to cast on 84 loops along the neckline and knit sp. No. 3 elastic band 1x1 seven rows. Then you need to change the sp. on No. 5 and continue knitting with an elastic band for another 43 rows. In 51st r. close all loops. A beautiful knitted sweater for women with mohair knitting needles is ready!
Delicate white sweater knitted from mohair with diagram and description
To knit a white sweater of this model, you only need yarn and knitting needles. Read the description about how to connect it.
Pink fashionable mohair sweater with openwork braids for beginners
Sweater knitted from melange yarn with patterns and descriptions for beginners
The front of a melange yarn sweater is knitted similarly to the back, but the neckline is knitted separately. To do this, at a height of 50 (51) 52 from the beginning of knitting, you need to close 8 (9) 8 central loops. Continue knitting each of the parts separately. Then in every second row, decrease 7 times on both sides, one loop at a time. The shoulders are knitted like on the back. At a height of 70 (71) 72 close the loops.
To knit sleeves, you need to cast on 5 needles 34 loops and knit 10 cm with an elastic band. Next we knit with stockinette stitch sp. No. 6. To decorate the bevel of the sleeves, you need to add 1 loop in every 14th row from the elastic 4 times, 5 times in 12 r. on the 1st loop and 6 times on the 1st stitch in every 10th row. After 45 cm from the beginning of knitting, we form the okat. To do this, 13 times in every 2nd row we make decorative stitches, decrease 1 stitch and cast off 2 stitches. 2 times. At a height of 60 cm, bind off 4 (6) 8 loops.
Product assembly. Sew shoulders and sides. Sew in the sleeves. Cast on 84 stitches along the neckline. Knit in the round with an elastic band of 18 cm. In every second r. make 1 yarn over from two knit stitches in the middle of the front neck. Next row knit according to the pattern. Your knitted stylish sweater made from melange yarn is ready!
Beautiful pink melange sweater
Original white women's knitted sweater with a round yoke with diagrams and descriptions for beginners
A very delicate white sweater with a round yoke will suit most girls and women. Read on to learn how to knit a stylish and youthful sweater. Knitting a round yoke is not particularly difficult, and at the same time it looks very feminine.
You will need:
- 750 gr. cotton and viscose yarn (120 m/50 g);
- straight and circular knitting needles with numbers 3 and 3.5.
Size: 44-46(48-50).
Description
The main pattern is knitted according to pattern 1. The placket pattern is 1 p. persons.p., 1 rub. purl loop. The yoke is knitted with the following pattern - pattern 2, knit circles, purl circles - we knit the loops in accordance with the pattern, and purl the yarn overs.
We start knitting the back of the sweater with a set of loops 98 (106) per sp. No. 3. Knit the next 7 centimeters with a 2x2 rib. In the last row of elastic, add 35 (37) stitches evenly along the entire length. Next we knit with the main pattern using knitting needles No. 3.5. Having knitted 32.5 centimeters from the beginning of the fabric, bind off 2 loops on both sides and then cast off 1 stitch 8 times. and 2 pets. alternately in each second row. When the length of the fabric reaches 39 cm, you need to put the loops aside.
The front part is knitted similarly to the back.
Knitting sweater sleeves begins with a set of 50 (54) stitches per sp. No. 3. Continue knitting with an elastic band for 6 centimeters. In the last row of elastic, add 29 (25) cm evenly. Using knitting needles No. 3.5, continue knitting with the main pattern, starting from the arrow in pattern No. 1. To create a sleeve bevel, you need to add 16 times one loop in every sixth row. Having knitted 40.5 cm from the edge of the part, you need to bind off two loops in each second row, alternately eight times, 1 stitch each. and 2 pet. There should be 83 stitches left on the knitting needles. Place the loops at a height of 47cm. We knit the second sleeve in exactly the same way.
Knitting a yoke begins with collecting all the postponed loops on a circle. No. 3.5. We knit the next row with knit stitches. Then touch the edge loops and knit two loops together 11 (12) times. Result – 361(380) pets. We continue knitting the yoke pattern. Having knitted according to pattern No. 2, we switch to circle knitting needles No. 3 and knit 2.5 centimeters with a strip pattern. In the fifth circle, evenly distribute the decreases - six times, 2 stitches each.
It is advisable to join the finished parts using a knitted seam.
Congratulations! An elegant women's white sweater with a round yoke is ready!
Beautiful red sweater with a round yoke with a collar
This red sweater with a round yoke and a wide collar looks very impressive. Red color suits girls and women with a bright appearance, most often brown-haired. But if red doesn’t suit you very well, then you can take threads of any other color. We suggest you link it according to the description.
Original white women's sweater with braids with patterns
Pink openwork original sweater
The pink openwork sweater is knitted with 4.5 knitting needles and wool yarn. The openwork pattern is knitted according to the pattern below.
Openwork sweater knitting video master class for beginners
Women's raglan sweater
To link a very popular one, watch this video.
The diagram below shows how you can knit raglan.
Ways to reduce raglan sleeves.
Reducing the loops using raglan sleeve needles.
Decorative decrease in raglan sleeves.
Beautiful gray raglan sweater with diagrams and descriptions
Green women's sweater with hood
A sweater with a hood of this model is ideal for walks, trips out of town and informal meetings, both for girls and women. Such a beautiful and original sweater with a hood and a beautiful pattern will become an indispensable item in your wardrobe.
You will need:
- 600-700 gr. Merino Air sheep wool yarn (130 m/50 g);
- knitting needles No. 4.5.
Size: 36/38 (40) 42/44.
Knitting an elastic band – 2 edge loops + loops multiples of 4. Knit rows – 1 stitch + 2 stitches + 1 stitch. Purl knit according to the pattern. The diagram shows only knits.r., and purl.r. knitted according to the pattern. We repeat the rapport between the edge loops. Pattern with braids (A) – loops are multiples of 4 and two edge loops. Knitting is carried out according to pattern No. 1. Repeat rows 1-4, complete rows 5-6. Pattern with braids (B) - loops in multiples of 8 and two edge loops. We knit according to pattern No. 2. We knit once 1-14 r. and repeat 5-14 rubles. Honeycomb (pattern) - loops are multiples of 4 and two edge loops, knit according to pattern No. 3 with 1-4 r.
Pattern A - the sequence is as follows: elastic band - 28 rubles, 34 rubles. pattern A, 74 rub. pattern B, 30(34)38 honeycomb pattern. Total 166(170)174 rows depending on size.
Pattern B - the sequence is as follows: knit 68 rows with an elastic band, 42 r. pattern A, 22 r. honeycomb pattern. Total 132 rows.
To knit the back of a sweater with a hood, we need to cast on 114 (122) 130 stitches. and knit with pattern A. After 40.5 centimeters from the beginning of knitting (this is approximately 110 rubles), we close eight loops on each side for the armholes. After 59 (60.5) 62 centimeters from the edge of knitting for bevels, close in every second row 7 (8) 9 stitches. at both sides. After 61.5 (63) 64.5 cm from the edge of the knitting, close the loops.
We knit the front part of the sweater with a hood like the back, but to knit the neckline we use 55.5 (57) 58.5 centimes. we close the central 12 loops and finish the resulting two sides separately. To get a beautiful round neck, we close off 1 x 4.5 x 2 and 1 x 1 stitches in every second row. Focusing on the back, close the loops.
To knit the sleeves of a sweater with a hood, we need to cast on 58 (62) 66 stitches. and knit with pattern B. In each. in the eighth row we add one loop 13 times and in every sixth row three times one loop, in the subsequent eighth row one loop 1 time and in every sixth row one loop 1 time. After 49 centimes. (32 rows) from the edge of the product, close all loops.
Start knitting the hood from the left half. To do this, cast on 18 stitches. and knit with a braided pattern (A). Additionally, we cast on from the set edge for the side bevel on the right in every second row 4x6 and 4x7 stitches. and include them in the pattern. After 21.5 centimes. from the edge we close 1 st to round it inward on the right. and every 2nd row 4x1.4x2.1x3.1x4 stitches. After 29.5 centimes. put all the loops aside. Symmetrically knit the right side and connect the set-on loops with a knitted seam and connect the back seam.
We assemble the product. To do this, we sew the shoulders and sew the hood to the neck of the sweater. We sew in the sleeves, sew the sides and sleeves at the seams. Congratulations – your beautiful hooded sweater is ready!
Blue sweater with aran with description
A sweater with beautiful arans looks very impressive. We invite you to connect this simple model with arans. It is suitable for girls and women of any age.
To knit a sweater with arans, you need to learn how to knit them. From this video master class you will learn how to do this.
Pattern for a sweater or jacket – 1
Pattern for a sweater or jacket – 2
Pattern for a sweater or jacket – 3
Pattern for a sweater or jacket – 4
The original shape of this sweater is achieved by diagonally knitting sections of elastic.
DIMENSIONS
36/38 (40) 42/44YOU WILL NEED
Yarn (48% polyester, 26% wool, 13% mohair, 8% polyacrylic, 5% polyamide; 100 m/50 g) - 400 (450) 500 g beige; knitting needles No. 6 and 7; circular knitting needles No. 6.PATTERNS AND DIAGRAMS
RUBBER
Knit with needles No. 6 (odd number of loops). After casting on loops, start with 1 purl row: edge, alternately 1 purl, 1 knit, finish with 1 purl, edge. In the front rows, knit the loops according to the pattern.Circular rows: alternately 1 knit, 1 purl.
Knit the following patterns using knitting needles No. 7.
PATENT RUBBER
The number of loops is a multiple of 4 + 1 + 2 edge loops.Front rows: edge, * 1 patent loop (= 1 loop with 1 yarn over, slip as purl), 3 purls, from * constantly repeat, finish with 1 patent loop, edge.
Purl rows: edge stitch, * 1 patent loop (= knit a slipped double crochet stitch together with a purl stitch), knit 3, from * repeat constantly, finish with 1 patent loop, edge row.
"BRAID" PATTERN
The number of loops is a multiple of 8 = knit according to. scheme. It shows facial rows. In the purl rows, knit the loops according to the pattern, knit the yarn overs purl. Constantly repeat rapport and rows 1-10.
EMPHASIZED DECREASES
At the beginning of the row after the edge and at the end of the row before the edge, knit 2 loops together with a purl.COLLAR PATTERN
Knit with needles No. 6 (the number of loops is a multiple of 4).1st round: * 1 patent loop (= 1 loop with 1 yarn over, slip like a purl), purl 3, from * constantly repeat.
2nd round: 1 patent loop (= knit a slipped loop with a double crochet), purl 3, from * constantly repeat.
Constantly repeat the 1st and 2nd circular rows.
KNITTING DENSITY
14 p. x 22 r. = 10 x 10 cm, tied with patent elastic;16 p. x 20 r. = 10 x 10 cm, knitted with a braid pattern;
32 stitches of braid pattern = 20 cm.
ATTENTION!
When knitting patent stitches in a knitted fabric, only every 2nd row is visible.PATTERN
COMPLETING OF THE WORK
BACK
Cast on 63 (67) 71 stitches on the knitting needles and knit 3 cm = 7 rows with an elastic band for the placket.After 57.5 cm = 126 rows from the bar, close for the shoulder bevel on both sides 1 x 3 (4) 5 p., then in every 2nd row 1 x 3 (4) 5 p. and 2 x 3 p.
After 61 cm = 134 rows from the bar, close off the remaining 39 sts, of which the middle 31 sts form the neckline, the outer 4 sts each form the shoulders.
Attention!
The front is shorter than the back.The side corners with the bottom edge rounded upward, as well as the shoulder bevels, are formed due to the diagonal arrangement of the pattern on both sides of the “braid” pattern.
The dimensions on the front pattern were partially obtained by measuring the model.
BEFORE
Cast on 71 (75) 79 stitches on the knitting needles and for the placket knit 3 cm = 7 rows with an elastic band, while in the 1st purl row between the edges start and finish 1 knit stitch and in the last purl row in the middle add 1 loop = 72 (76) 80 P.Continue working as follows: edge, 19 (21) 23 stitches with patent elastic, while starting and ending with 3 purls (1 patent loop) 1 purl, 32 stitches with a braid pattern, 19 (21) 23 stitches with patent elastic , as before, edge.
To place the pattern diagonally in each subsequent front row, subtract 1 stitch on both sides, simultaneously before and after the braid pattern, knit 1 knit or purl crossed thread from a transverse thread, according to. pattern and include it in the patent elastic. The number of loops remains unchanged!
After 45 cm = 90 rows from the bar (measure in the middle), bind off the middle 32 loops for the neckline and finish both sides separately, while continuing the rhythm of decreases and increases.
After 5.5 cm = 12 rows from the beginning of knitting the neck, close off the remaining 20 (22) 24 stitches of the shoulders.
SLEEVES
Cast on 31 (35) 39 stitches on the knitting needles for each sleeve and knit 3 cm = 7 rows with an elastic band for the placket.Continue working with a patent rubber band.
To bevel the sleeves, add 6 x 1 sts on both sides in every 12th row from the bar. pattern = 43 (47) 51 p.
After 38 cm = 84 rows from the bar, close the sleeves on both sides with 1 x 2 p., then in every 2nd row 8 x 1 p.
After 46 cm = 102 rows from the bar, leave the remaining 7 (11) 15 stitches.
ASSEMBLY
Sew the shoulder seams, slightly pressing the shoulder edges of the front.
Cast on 64 stitches on circular needles along the edge of the neckline and for the collar knit 5 cm = 12 circular rows with a collar pattern and 3 cm = 7 circular rows with an elastic band. Then close the loops like knit stitches.
Sew sleeves according to according to the size on the pattern, while pulling the edges of the sleeves tight. Sew side seams and sleeve seams, slightly stretching or seating the side edges of the front.
Photo: Sabrina magazine No. 9/2016
The original shape of this sweater is achieved by diagonally knitting sections of elastic.
DIMENSIONS
36/38 (40) 42/44
YOU WILL NEED
Yarn (48% polyester, 26% wool, 13% mohair, 8% polyacrylic, 5% polyamide; 100 m/50 g) - 400 (450) 500 g beige; knitting needles No. 6 and 7; circular knitting needles No. 6.
PATTERNS AND DIAGRAMS
RUBBER
Knit with needles No. 6 (odd number of loops). After casting on loops, start with 1 purl row: edge, alternately 1 purl, 1 knit, finish with 1 purl, edge. In the front rows, knit the loops according to the pattern.
Circular rows: alternately 1 knit, 1 purl.
Knit the following patterns using knitting needles No. 7.
PATENT RUBBER
The number of loops is a multiple of 4 + 1 + 2 edge loops.
Front rows: edge, * 1 patent loop (= 1 loop with 1 yarn over, slip as purl), 3 purls, from * constantly repeat, finish with 1 patent loop, edge.
Purl rows: edge stitch, * 1 patent loop (= knit a slipped double crochet stitch together with a purl stitch), knit 3, from * repeat constantly, finish with 1 patent loop, edge row.
"BRAID" PATTERN
The number of loops is a multiple of 8 = knit according to. scheme. It shows facial rows. In the purl rows, knit the loops according to the pattern, knit the yarn overs purl. Constantly repeat rapport and rows 1-10.
EMPHASIZED DECREASES
At the beginning of the row after the edge and at the end of the row before the edge, knit 2 loops together with a purl.
COLLAR PATTERN
Knit with needles No. 6 (the number of loops is a multiple of 4).
1st round: * 1 patent loop (= 1 loop with 1 yarn over, slip like a purl), purl 3, from * constantly repeat.
2nd round: 1 patent loop (= knit a slipped loop with a double crochet), purl 3, from * constantly repeat.
Constantly repeat the 1st and 2nd circular rows.
KNITTING DENSITY
14 p. x 22 r. = 10 x 10 cm, tied with patent elastic;
16 p. x 20 r. = 10 x 10 cm, knitted with a braid pattern;
32 stitches of braid pattern = 20 cm.
ATTENTION!
When knitting patent stitches in a knitted fabric, only every 2nd row is visible.
PATTERN
COMPLETING OF THE WORK
BACK
Cast on 63 (67) 71 stitches on the knitting needles and knit 3 cm = 7 rows with an elastic band for the placket.
After 57.5 cm = 126 rows from the bar, close for the shoulder bevel on both sides 1 x 3 (4) 5 p., then in every 2nd row 1 x 3 (4) 5 p. and 2 x 3 p.
After 61 cm = 134 rows from the bar, close off the remaining 39 sts, of which the middle 31 sts form the neckline, the outer 4 sts each form the shoulders.
Attention!
The front is shorter than the back.
The side corners with the bottom edge rounded upward, as well as the shoulder bevels, are formed due to the diagonal arrangement of the pattern on both sides of the “braid” pattern.
The dimensions on the front pattern were partially obtained by measuring the model.
BEFORE
Cast on 71 (75) 79 stitches on the knitting needles and for the placket knit 3 cm = 7 rows with an elastic band, while in the 1st purl row between the edges start and finish 1 knit stitch and in the last purl row in the middle add 1 loop = 72 (76) 80 P.
Continue working as follows: edge, 19 (21) 23 stitches with patent elastic, while starting and ending with 3 purls (1 patent loop) 1 purl, 32 stitches with a braid pattern, 19 (21) 23 stitches with patent elastic , as before, edge.
To place the pattern diagonally in each subsequent front row, subtract 1 stitch on both sides, simultaneously before and after the braid pattern, knit 1 knit or purl crossed thread from a transverse thread, according to. pattern and include it in the patent elastic. The number of loops remains unchanged!
After 45 cm = 90 rows from the bar (measure in the middle), bind off the middle 32 loops for the neckline and finish both sides separately, while continuing the rhythm of decreases and increases.
After 5.5 cm = 12 rows from the beginning of knitting the neck, close off the remaining 20 (22) 24 stitches of the shoulders.
SLEEVES
Cast on 31 (35) 39 stitches on the knitting needles for each sleeve and knit 3 cm = 7 rows with an elastic band for the placket.
Continue working with a patent rubber band.
To bevel the sleeves, add 6 x 1 sts on both sides in every 12th row from the bar. pattern = 43 (47) 51 p.
After 38 cm = 84 rows from the bar, close the sleeves on both sides with 1 x 2 p., then in every 2nd row 8 x 1 p.
After 46 cm = 102 rows from the bar, leave the remaining 7 (11) 15 stitches.
ASSEMBLY
Sew the shoulder seams, slightly pressing the shoulder edges of the front.
Cast on 64 stitches on circular needles along the edge of the neckline and for the collar knit 5 cm = 12 circular rows with a collar pattern and 3 cm = 7 circular rows with an elastic band. Then close the loops like knit stitches.
Sew sleeves according to according to the size on the pattern, while pulling the edges of the sleeves tight. Sew side seams and sleeve seams, slightly stretching or seating the side edges of the front.
You will need
Yarn (48% polyester, 26% wool, 13% mohair, 8% polyacrylic, 5% polyamide; 100 m/50 g) - 400 (450) 500 g beige; knitting needles No. 6 and 7; circular knitting needles No. 6.Patterns and schemes
Rubber
Knit with needles No. 6 (odd number of loops). After casting on loops, start with 1 purl row: edge, alternately 1 purl, 1 knit, finish with 1 purl, edge. In the front rows, knit the loops according to the pattern.Circular rows: alternately 1 knit, 1 purl.
Knit the following patterns using knitting needles No. 7.
Patent gum
The number of loops is a multiple of 4 + 1 + 2 edge loops.Front rows: edge, * 1 patent loop (= 1 loop with 1 yarn over, slip as purl), 3 purls, from * constantly repeat, finish with 1 patent loop, edge.
Purl rows: edge stitch, * 1 patent loop (= knit a slipped double crochet stitch together with a purl stitch), knit 3, from * repeat constantly, finish with 1 patent loop, edge row.
Braid pattern
The number of loops is a multiple of 8 = knit according to. scheme. It shows facial rows. In the purl rows, knit the loops according to the pattern, knit the yarn overs purl. Constantly repeat rapport and rows 1–10.
Emphasized decreases
At the beginning of the row after the edge and at the end of the row before the edge, knit 2 loops together with a purl.Collar pattern
Knit with needles No. 6 (the number of loops is a multiple of 4).1st round: * 1 patent loop (= 1 loop with 1 yarn over, slip like a purl), purl 3, from * constantly repeat.
2nd round: 1 patent loop (= knit a slipped loop with a double crochet), purl 3, from * constantly repeat.
Constantly repeat the 1st and 2nd circular rows.
Knitting density
14 p. x 22 r. = 10 x 10 cm, tied with patent elastic;16 p. x 20 r. = 10 x 10 cm, knitted with a braid pattern;
32 stitches of braid pattern = 20 cm.
Attention!
When knitting patent stitches in a knitted fabric, only every 2nd row is visible.Pattern
Completing of the work
Back
Cast on 63 (67) 71 stitches on the knitting needles and knit 3 cm = 7 rows with an elastic band for the placket.After 57.5 cm = 126 rows from the bar, close for the shoulder bevel on both sides 1 x 3 (4) 5 p., then in every 2nd row 1 x 3 (4) 5 p. and 2 x 3 p.
After 61 cm = 134 rows from the bar, close off the remaining 39 sts, of which the middle 31 sts form the neck, the outer 4 sts each form the shoulders.
Attention!
The front is shorter than the back.The side corners with the bottom edge rounded upward, as well as the shoulder bevels, are formed due to the diagonal arrangement of the pattern on both sides of the “braid” pattern.
The dimensions on the front pattern were partially obtained by measuring the model.
Before
Cast on 71 (75) 79 stitches on the knitting needles and for the placket knit 3 cm = 7 rows with an elastic band, while in the 1st purl row between the edges start and finish 1 knit stitch and in the last purl row in the middle add 1 loop = 72 (76) 80 P.Continue working as follows: edge, 19 (21) 23 stitches with patent elastic, while starting and ending with 3 purls (1 patent loop) 1 purl, 32 stitches with a braid pattern, 19 (21) 23 stitches with patent elastic , as before, edge.
To place the pattern diagonally in each subsequent front row, subtract 1 stitch on both sides, simultaneously before and after the braid pattern, knit 1 knit or purl crossed thread from a transverse thread, according to. pattern and include it in the patent elastic. The number of loops remains unchanged!
After 45 cm = 90 rows from the bar (measure in the middle), bind off the middle 32 loops for the neckline and finish both sides separately, while continuing the rhythm of decreases and increases.
After 5.5 cm = 12 rows from the beginning of knitting the neck, close off the remaining 20 (22) 24 stitches of the shoulders.
Sleeves
Cast on 31 (35) 39 stitches on the knitting needles for each sleeve and knit 3 cm = 7 rows with an elastic band for the placket.Continue working with a patent rubber band.
To bevel the sleeves, add 6 x 1 sts on both sides in every 12th row from the bar. pattern = 43 (47) 51 p.
After 38 cm = 84 rows from the bar, close the sleeves on both sides with 1 x 2 p., then in every 2nd row 8 x 1 p.
After 46 cm = 102 rows from the bar, leave the remaining 7 (11) 15 stitches.
Assembly
Sew the shoulder seams, slightly pressing the shoulder edges of the front.Cast on 64 stitches on circular needles along the edge of the neckline and for the collar knit 5 cm = 12 circular rows with a collar pattern and 3 cm = 7 circular rows with an elastic band. Then close the loops like knit stitches.
Sew sleeves according to according to the size on the pattern, while pulling the edges of the sleeves tight. Sew side seams and sleeve seams, slightly stretching or seating the side edges of the front.
Dimensions: 36/38 (40/42) 44/46.
You will need: yarn (100% natural wool; 85 m/50 g) - 500 (550) 600 g beige and 250 (300) 300 g blue; knitting needles No. 5; circular knitting needles No. 5; applique with coat of arms.
Pattern 1: rib = forward and reverse rows (odd number of stitches). Each row begins and ends with 1 edge. Front rows: alternately 1 knit, 1 purl, finish with 1 knit. Purl rows: knit loops according to the pattern. Circular rows (even number of loops) = alternately 1 front, 1 purl.
Pattern 2: purl stitch = knit rows - purl loops, purl rows - knit stitches.
Pattern 3: pattern of “braids” (the number of loops is a multiple of 26 + 8) = knit according to. scheme. It shows facial rows. In the purl rows, knit loops according to the pattern. Perform rapport 3 times, ending with loops after rapport. Repeat rows 1-12 constantly.
Sequence of stripes: 2 rows beige. * 6 rows of blue, 6 rows of beige thread, from * constantly repeat. Knitting density: pattern 2 - 20 p. x 27.5 r. = 10 x 10 cm; pattern 3 - 27.5 p. x 27.5 r. = 10 x 10 cm.
Back: With beige thread, cast on 97 (105) 113 loops on the knitting needles and knit 3 cm for the placket with pattern 1. In the last purl row on the middle 75 loops, evenly distributed, add 11 sts = 108 (116) 124 sts. Continue working according to. sequence of stripes as follows: edge, 10 (14) 18 p. pattern 2.86 p. pattern 3.10 (14) p. pattern 2, edge. After 38 cm = 104 rows from the bar, continue working with beige thread. After 39.5 cm = 108 rows from the bar, close 1 x 3 p. for the armholes on both sides, then in every 2nd row 1 x 2 p. and 4 x 1 p. = 90 (98) 106 p. After 59 cm = 162 rows (61 cm = 168 rows) 63 cm = 174 rows from the bar, close all loops, with the middle 58 sts forming the neck, the outer 16 (20) 24 sts forming the shoulders.
Before: start like a back, but after 33.5 cm = 92 rows from the bar, continue working with beige thread. After 35 cm = 96 rows from the bar, make armholes, as on the back. After 43 cm = 118 rows (45 cm = 124 rows) 47 cm = 130 rows from the bar, close the middle 20 stitches for the neckline and finish both sides separately. To round the inner edge, close in every 2nd row 1 x 4 sts, 1 x 3 sts, 2 x 2 sts and 8 x 1 sts. After 54.5 cm = 150 rows (56.5 cm = 156 rows) 58.5 cm = 162 rows from the bar, close off the remaining 16 (20) 24 stitches of the shoulders, respectively.
Sleeves: With beige thread, cast on 47 (51) 55 loops on the knitting needles for each sleeve and knit 3 cm for the placket with pattern 1, while in the last purl row add 1 p. = 48 (52) 56 p. Continue working with pattern 3 acc. sequence of stripes, with pattern 3 distributed from the middle. Do not make the crossings at the beginning and end of the row yet, but replace them with knit ones and during subsequent increases include them in pattern 3. At the same time, add sleeves for bevel on both sides alternately in every 6th and 8th row from the bar 13x1 p. (in each 4th row 4 x 1 p. and in every 6th row 12 x 1 p.) in every 4th row 12 x 1 p. and in every 6th row 7 x 1 p. acc. pattern and color of thread = 74 (84) 94 p. After 33.5 cm = 92 rows from the bar, continue working with beige thread.
After 35 cm = 96 rows from the bar, close the sleeves for piping on both sides 1 x 3 p., then in every 2nd row 2 x 2 p.. 17 x 1 p., 2 x 2 p. and 1 x Zp. (4 x 2 p., 13 x 1 p., 4 x 2 p. and 1 x 3 p.) 6 x 2 p., 9 x 1 p., 6 x 2 p. and 1 x 3 p. Through 51 .5 cm = 142 rows from punkka, close off remaining 12 (14) 16 sts.
Assembly: sew shoulder seams. For the strap, use beige thread to cast on 132 loops on circular needles along the edge of the neckline and purl 1 circular row, as well as 10 circular rows with pattern 1. Then bind off all the loops according to the pattern. Sew in the sleeves, sew side seams and sleeve seams. Sew a motif to the right sleeve.
