How to make a bow from a satin ribbon step by step. How to make bows from satin ribbons with your own hands step by step with a photo. How to tie a ribbon bow on a dress

Bows are everywhere. Mothers tie their daughters' hair with them. They serve as accessories for clothes and shoes.

Bouquets of flowers decorated with them look more impressive. Gifts, beautifully packaged and tied with an openwork ribbon, will not leave anyone indifferent. For the manufacture of bows, a wide variety of materials and techniques are used, depending on what result you want to achieve.

How beautiful to tie a bow from a satin ribbon

Satin ribbons look very beautiful on their own, and in combination with an interesting shape, they contribute to the creation of a bright and unique image.

Classical

The classic version of the bow has the simplest structure and does not require much experience for its execution.

Required:

satin ribbon;
scissors.

Figure #1.

Sequencing:

Cut the tape to the desired length;
Fold the strip in accordance with what is shown in Figure No. 1, point (a);
Cross the ends of the material (b);
Pull one end of the tape into the resulting loop (c);
Knot - tighten, and the tape - straighten.

Strict

A more sophisticated option that allows you to combine beauty with rigor is a great addition to the office style.

Required:

satin ribbon (base);
satin ribbon (finishing);
fabric glue;
scissors.

Figure #2.

Sequencing:

Measure the required length and cut off the appropriate part of the tape;
Fold the strip in the form of a circle, connecting the ends;
Fasten the place of contact of the ends with glue and press the joint to the opposite side of the circle;
Gently, without leaving bubbles and folds, smooth the material at the connecting point;
Using a finishing tape, wrap the joint (picture No. 2);
Glue the ends of the trim as well.

Double

The decoration is simple in execution and, at the same time, original in appearance.

Required:

two satin ribbons of different colors and different widths (but they must be in harmony);
glue;
scissors.

Sequencing:

Cut off the parts of the wide and thin ribbons so that they have the same length;
Put a thin strip on top and along a wide one exactly in the middle, glue the ends of the two tapes adjacent to each other;
The opposite ends of the tapes are also fastened with glue, forming a circle, and then press the joint to the opposite side of the tape;
Cut off a small piece of a narrow strip and tie it across the bow, overlapping the connection point, tighten;
Remove excess cross tape if necessary.

How beautiful to tie a bow around your neck

A neckerchief with the right selection will fit into any situation and will suit any outfit. To add charm to the image, you can give this accessory the shape of a bow. A bow can be laconic and small, reminiscent of a male butterfly, or lush and bright, drawing attention to itself.

For such a "decor" you will need a scarf of small width and thickness. It must be folded into a thin strip and proceed to the design of the butterfly.

Put the resulting "harness" on the neck so that one of the hanging ends is longer;
Cross the ends of the strip, placing the long side on top, and then stretching it through the bottom into the resulting loop;
Give the short side the shape of a half-bow, and lower the long side over the central part of the decoration;
From the long end, fold the second half bow and pull the element through the loop behind the first half bow;
Tighten the "butterfly";
Straighten the halves of the decoration, achieving their symmetry.

Volume

This option is performed with a regular width scarf and, despite the simplicity of execution, looks extremely impressive.

Wrap a scarf around your neck;
Give the ends of the accessory the shape of loops;
Weave the loops, tying them into a knot;
Straighten the resulting bow, making it as lush as possible.

How beautiful to tie a bow on a dress

Bows attached to a dress can be an ordinary decoration, or they can draw attention to advantages or hide flaws. All these qualities will be in the hands of any lady.

You can place a figuratively tied ribbon on any part of the dress. Lush jewelry options are more suitable for tight-fitting outfits, while neat and modest ones are more suitable for looser ones.

Depending on the placement of the tape, you can focus on the belt, chest (décolleté), shoulders and other attractive curves of the female body. In many cases, fashionistas buy ready-made bows and attach them in the right place.

One of the options self-manufacturing such an element is as follows:

Fold the two ends of the ribbons of the necessary material in the form of loops and cross with each other;
Fix the central part with a brooch or pin with decorations;
Sew an accessory to any part of the dress where needed.

Bow with one loop

Very simple, but aesthetic and timeless option.

A bow from one loop is made as follows:

As in the classic version, you need to start with two loops;
One of the ends must be circled around the second and stretched ½ into the knot;
The second end must be threaded into the knot to the end, leaving it to hang freely.

How beautiful to tie a bow on the belt

A classic bow in the belt area can be considered a universal accessory for a dress of any style:

Fold the ends of the belt in the form of loops;
Cross the resulting loops;
Skip one of the elements into the loop formed by the crossed ends;
Gently tighten the resulting knot and straighten the bow.

How to tie a beautiful ribbon bow on chairs

Usually bows on chairs appear during the preparation of premises for various solemn events. Before fixing the decoration, it is customary to cover each chair with a cover of a harmonizing color, but this is not necessary.

In addition, the use of such an accessory implies compliance with the following rules:

Do not break the festive concept with out-of-print colors or inappropriate bow design;
To stiffen the shape, use organza ribbons;
Make sure that the edges of the ribbons are neatly processed and do not create an untidy impression.

As in any other case, the most commonly used bow for decorating chairs is the classic one.

If there is no cover on the chair, then you can do the following:

Fold the ribbon for the bow in half;
Hang the strip on the back of the chair so that a “loop” hangs from the inner (which the seated person touches) side of the back, and two tails from the other;
Under the crossbar, thread both tails into a loop and tighten the tape a little;
If you wish, you can stop at this, or you can wrap the adhesion point with the ends of the tape (initially you need to direct them in opposite directions) and also tie the decoration.

The bow can be lowered and raised along the back, adjusting the height of its location. It is also allowed to place several such strips side by side.

How beautiful to tie bows on September 1

So that the day of knowledge leaves behind a lot of good impressions and a charge of vivacity for the next academic year, it is necessary to properly prepare for it. Last but not least, the girls associate the training with a brand new uniform and beautiful white bows in their hair. There are several ways to bring this idea to life.

Method number 1: Pleated bow

This option is usually preferred by girls. adolescence because it looks very cute and romantic.

Required:

wide nylon ribbon;
a thin elastic band (preferably to match the hair).

Step-by-step instruction:

Using an elastic band, fix the hair - this is the basis;
Tie the ribbon around the hair, distributing it so that one of the "tails" is approximately 2/3 of the total length;
Fold the longer end three times, and tie the resulting layers short;
Straighten the fabric, making it voluminous and lush.

Method number 2: Four petals

Lush decoration, great for school celebrations.

Required:

long corrugated tape.

Sequencing:

Wrap the hair taken in the tail with a fabric strip and tie a knot in such a way that the remaining ends are of the same length;
Fold the loops of the "tails" and tie with each other in the form of a bow;
Repeat the same with the remaining long ends;
Unfold all loops.

Method number 3: Lush flower

Exquisite decoration from satin ribbon do-it-yourself: quick and easy.

Required:

long satin ribbon;
thread (to match the color of the tape);
thin hair band.

Sequencing:

Skip the thread along the middle of the tape;
Move the satin as far as possible along the thread, collecting it into an "accordion";
Roll up the resulting assembly like a snail, fix the base with a thread;
Sew a fabric flower to the elastic band.

Options for a beautifully tied bow on a gift box

The gift is good and important in itself, but it makes the right impression only with the appropriate design. First of all, this applies to the bows decorating the gift box. They can take on completely different forms.

Terry

Its other name is multilayer.

This is a win-win option that allows you to achieve the desired effect.

Fold the satin ribbon several times;
Make cuts as shown in the picture;
Fold the satin so that the incisions are in the center of the strip, tie this point with a small piece of ribbon;
Pull out all the petals one by one (taking them out to the right, then to the left), moving from the inner to the outer, and fluff them well;
If necessary, process the edges of the bow (so as not to crumble).

Lush

This decoration is made of three ribbons of different widths and colors.

It creates a very cozy impression and is especially suitable for the Christmas and New Year holidays.

Fold a medium-width strip of fabric 4 times so that each next layer goes exactly on top of the previous one;
First, give the widest ribbon a similar shape, and then straighten the layers so that they lie crosswise relative to each other;
Put the first element on top of the second, and drag everything in the center with a thin ribbon.

When tying a bow, you should always take into account its compatibility with surrounding objects, materials and purpose of use. Of the materials, it is better to prefer denser ones, since silk does not hold its shape well enough, which negatively affects the appearance.

Two ways to tie the simplest satin ribbon bows are in the next video.

A variety of accessories traditionally adorn girls' hair. But even as adults, it is difficult for us to refuse them. They refresh our handbags, hats and dresses, make the most everyday hairstyle festive. Beautiful bouquet looks even more elegant if you tie a small bow of tulle or organza on it. But that's not all. Very important for a gift beautiful packaging. A paper bow, originally tied on the box, will emphasize the solemnity of the moment. In the store you can find any bows for girls, interesting hairpins.

Making a bow out of fabric with your own hands, you emphasize your originality.

It is not difficult to figure out how to make a bow from a ribbon with your own hands.

Any girl will be delighted if her mother makes her own hair ornament, decorates it with beads or beads, sequins or tulle. Before you make a bow out of fabric, you need to understand its purpose:

small, made on a fork - for a small souvenir;
satin ribbon bows - for girlish hairpins;
lush, brightly decorated - for a children's holiday;
paper - for gift wrapping;
unobtrusive, elegant - for any dress;
for interior decoration.

Before you make beautiful bows from satin ribbon, you need to choose the right one. Its color should be in harmony with the dress or hat. There is no need to explain how to make a satin ribbon bow in the traditional way.

Let's try to make a beautiful multi-layered product from ribbons of different colors and widths tied together. Purchase material in 3-4 colors of different widths. The widest ribbon should be the longest, the narrowest the shortest. Trim the ends at an angle so they don't fray. Lay out the strips of fabric so that the bottom is the widest strip, the top is the narrowest. Tie them in a narrow strip, leaving long ends to secure the jewelry on a gift or hairpin. Add some beads.

You can make very elegant ribbon bows with your own hands, step-by-step instruction will help you with this. From a ribbon of small width, you can create an elegant and elegant accessory.

Follow these steps:

Cut out a circle with a diameter of 2 centimeters from thick paper.
Cut the tape into pieces 6-7 centimeters long.
Using a glue gun, glue the end of one segment, glue the other end of the same segment after 5 mm.
Place the end of the second segment between the glued ends of the first segment, place the second one after 5 mm.
Glue several rows of such loops in this way, the last two rows may be smaller.
The middle of the flower can be enlivened with rhinestones or beads.

Consider another method of how to tie a bow from a ribbon. To get this elegant openwork bow, you will need satin ribbon, glue, scissors and a stapler.

The tape must be cut into 4 parts different lengths, connect the ends of each segment with glue. Lay the loops in size and fasten in the center with another strip. Tie a knot nicely, leaving fairly long ends. This elegant decoration will look great on a gift.

With a fork

Sometimes a very tiny bow is needed to decorate a postcard, make tiny earrings, or dolls. Consider how to tie a bow on a fork.

You will need a thin ribbon 0.5 cm wide and 10 cm long, a table fork and scissors. How to make a bow on a fork is clear from the following diagram. The mini bow is very easy to make.

A more complex bow from a ribbon on a fork will take a little more time, but the technique for creating them is very simple, a master class is not needed.

Kanzashi technique

The term kanzashi means folding. Using this technique, you can make bows from ribbons folded in a certain way. It allows you to create amazing things, and the step-by-step instructions given here will help you make kanzashi bows with your own hands.

To make a bow for girls with your own hands, you will need:

dark satin ribbon 5 cm wide;
the same white 2.5 centimeters wide;
the same dark 2.5 cm wide;
threads of a suitable color;
scissors, needle, glue;
hair clip or elastic band.

Do-it-yourself hair bows are made as follows:

Three pieces of 22.5 centimeters are cut from a wide dark ribbon, and three pieces 15.5 centimeters long are cut from white.
We burn the edges with a lighter, fold the segments of the dark segments in half, unfold and fold the ends with a small allowance. We strengthen the thread to the middle.
We do the same with the second segment, and superimpose it on the first, fix them. The third, also processed segment, is superimposed on top of the first two. We tighten the thread, tighten the bow, wrap it with a thread and sew it.
We carry out all the same operations with a white ribbon, we get exactly the same bow, but it will be smaller in size.
We glue a white bow on a dark one, wrap the middle of the product with a dark narrow ribbon, fix it well. If you planned to make an elastic band, then before tying the ribbon, lay the elastic there.

From rep ribbons

Before you make a bow from a satin or silk ribbon, make it from rep ribbons. Reps keeps its shape well, does not wrinkle.

You will need rep ribbons of different widths and patterns, a needle, thread, glue, an elastic band or a hairpin and all kinds of jewelry. Before you make a beautiful bow out of ribbons with your own hands, decide on its size, the width of the rep ribbons depends on it.

Cut out a rectangular template from plywood, the smaller side of which is equal to the width of the bow. Make a cut in the center of the figure. We impose a tape on the template so that the ends are directed in different directions. How many curls do you want for a bow, how many turns are needed. The ends of the tape must be fastened. With a seam forward needle, sew the ribbon through the through hole in the template. Remove the template, tighten the thread.

Usually this decoration has several layers. You can decorate the core with beads, you can wrap it with a thin shiny braid. Tie it tight and the decoration is ready.

Paper decorations

You want to pack a gift beautifully, and the question arises of how to make a paper bow with your own hands. Paper decorations can be of different colors and sizes depending on what they are intended for. The simplest do-it-yourself bows can be made in a few minutes. By the way, they can decorate the Christmas tree.

Before you make a bow for a gift, draw what shape your product will have, cut it out. Glue the jumper between the parts with glue, bend the sheets in the middle until the edges match. Lubricate the center of the second part with glue, place the first part on top, aligning the centers. Wrap the pieces with a strip of tape and glue them together.

Handmade accessories will never go out of fashion. Needlewomen will always be interested in questions about how to decorate your hair and dress in an original way, how to make a small bow for a bracelet, elegant bows for your daughter to school, an unusual decoration for a handbag, how to make a bow out of rubber bands, how to decorate your home, make it cozy. Having mastered these skills, you can always add a twist to your outfit, decorate a gift beautifully, and make the interior of your home interesting.

Gathered for a visit, chose a gift, now you don’t know how to pack it? Then you are at the right place. In this article, we will look at how to make a bow from a ribbon for decorating gifts, and also tell you how you can make an exclusive present for every taste from a regular ribbon.

How to create a festive mood?

A beautifully packaged gift with an original decoration always creates a festive mood, whether you give it or gave it to you. It is a beautiful bow, which can be called a classic decoration technique, that “warms up” the fantasy, making you tremble in anticipation of a surprise. The originality of this decoration lies in its versatility, since a ribbon bow can be made in different shapes or sizes, and today's market offers the widest selection of colors, from plain to complex patterns. Such decorations can give the souvenir more solemnity. Initially, you need to pack a surprise in gift paper, how to do it, read the article: well, we will teach you how to make a bow from a ribbon, most importantly, be patient and not quit work after the first failure, because a wonderful grateful smile of the hero of the occasion, to which you gathered in guests deserves a little effort.

How to make a voluminous ribbon bow to decorate a gift?

To get a really voluminous bow, you need to give preference to cuts made of hard material. Having picked up the ribbon, we do the following:

Having decided on the size of the bow (the longer the loops, the larger the bow will be), you need to make loops from the tape in 5–9 additions, laying them one on top of the other.
Smooth out the resulting loops and carefully trim the edges, as indicated in the photo below. You should get almost triangles around the edges.
Take the loops in the middle and part them on the sides so that the cut parts are in the center.
Fasten the narrowest central part. You can do this:

the same ribbon
sew with threads;
fasten with a stapler;
twist with wire.

Straighten the resulting half-loops, give them volume and a beautiful bow is ready!

How to make a fluffy ribbon bow? Video lesson

How to make a simple ribbon bow to decorate a gift?

You can make a strict version for a “male” present. It will look great both on the packaging and on the bottle of an expensive strong drink. And you can read more about souvenirs for the men's holiday in the article:. Let's get to work:

Cut off a piece of wide ribbon of the desired size, fold, glue the edges with glue. Should be a ring.
Flatten the resulting ring.
Hide the joint under the same, but thinner cut.
Gently glue the edges and a strict decoration is ready.

How to make a bow from a ribbon - a classic version

The classic version of the decoration is very simple in execution, while creating an excellent frame for any present.

With such a bow, both a book, a box of chocolates or a service, as well as ordinary wild flowers, will look great. Such a classic is performed according to the following steps:

Take a long ribbon and fold it into two loops, as in the photo below. In each hand, there should be one addition.
The loop that is on the left to start at the back, crossing two additions. It turns out a circle at the bottom.
Pull the right loop through the formed circle, pull it off. The center should be in the middle.
Straighten the loops - a beautiful bow is ready! If necessary, you can cut the lower ends to the desired shape (oblique, triangle, etc.).

Video tutorial: how to tie a classic-style ribbon bow to decorate a gift?

How to make a Dior bow from ribbon for decorating souvenirs?

The Dior bow is used not only in decorating gifts. With it, unforgettable decors for parties, weddings and other celebrations are created. By the way, take note of the rules of conduct at the table at such festivities. They are described in the article:.

To make such a bow, you need to follow these steps:

Prepare four cuts, of different lengths.
Roll each of them into a circle and fix with threads or glue.
Fold the circles in ascending order one on top of the other.
Tie the resulting design of ribbons in the center by inserting the strapping tape into the upper (smallest) circle, as in the photo below.
Attach the structure.

How to make a ribbon bow on a fork?

Do you believe that you can tie a beautiful bow on a fork? No? Then let's learn, we offer to try out two options for the execution of such an ornament.

Option No1

Let's try to solve the following equation: Ribbon + Fork = Original bow. To resolve, you need to do the following:

Cut a narrow ribbon of the desired size. For convenience of work, it should be at least 18 cm.
Conditionally divide it into a long and a short side. The short side will not be used.
Pass the long part between 2-3 cloves of the fork used.
And its end, bring up between the same teeth.
After these steps, you should get a small loop. Don't tighten it just yet.
Pass the rest of the long end through the loop inward again.
Pull this end out and tighten the knot.
Trim the long ends to the desired length, singe them with matches or a lighter.

OptionNo2

To get a beautiful bow in the form of a lush flower, you need to use two different ribbons:

thin;
wide nylon.

Execution steps:

Insert a narrow ribbon crosswise into the center of the fork. It will be needed almost at the end of the work.
Braid the fork teeth with a wide nylon cut, as shown in the photo below.
Pull off the bindings with a thin ribbon, tie.
Remove the workpiece, straighten.
Scorch the edges with fire.

The decoration is delicate. It will ideally complement any souvenir intended for the beautiful half of humanity.

Video tutorial: how to make a ribbon bow on a fork

Photo ideas for decorating gifts with bows

Almost every day in our life is a holiday. You won’t have time to spend the New Year, and then Valentine’s Day is on the way, and after it is March 8, and even friends celebrate their name days. All these dates have something in common - gifts. Choose perfect present- this is only half the battle, but its packaging is a whole art. At the same time, it is important not only to find the right paper and ribbon, but also to wrap the box beautifully with them. Let's figure it out

Preparatory work

We use bows not only during the holidays, but also in everyday life. They can decorate the house (for example, cling to curtains), decorate hairpins, clothes, use in needlework. There are a lot of options for their use, as well as ways to do it. First you need to choose the most suitable material for your craft.

Choosing a tape

First of all, you must clearly define what you are going to make a bow for and what color it should be. If you are wrapping a gift, the width of the ribbon must be chosen depending on the size of the box: wide ones are better for large presents, and narrow ones for small ones. Although, if you decide to go against the rules and tie a huge wide bow on a small package, it can look very good.

Remember the golden rules

If you are planning to make a beautiful ribbon bow for a dress, pay attention to
its texture. It should go well with the fabric from which the clothes are sewn.

To determine the length of the ribbon for a gift box, you can use the following method: wrap the gift twice and add about 60 cm to the resulting length for the bow itself.

Most often, satin fabric is used to tie a beautiful ribbon bow. But if you do not have experience in this matter, this material may seem too slippery and inconvenient for you to create. In this case, it is better to objectively assess your abilities and give preference to a rougher material.

A very convenient option for bows for gifts and bouquets is a ribbon, along the edges of which a thin wire is attached. It allows you to give the product any shape and keep it for a long time.

Always remember the most important rule when choosing ribbon: if you can tie it into a tight knot that won't fall apart, then it's perfect for your creation.

Gathering other materials

To make a bow, you will also need:

glue (test it in advance for the ability to fix the fabric);
sharp scissors that will clearly cut the tape and not chew its edges;
floristic wire (this material is not always necessary, but in the manufacture of some models you can’t do without it);
additional decor elements - beads, flowers, stars and any other trinkets that you want to decorate your product with.

So, we picked up the materials to make a ribbon bow. A master class on its creation can be mastered by everyone, regardless of their experience in needlework.

Classics of the genre

To begin with, let's try to make the most ordinary bow, without extra layers and details. But do not think that if it is simple in execution, it will look less advantageous than its magnificent counterparts.

So, how to tie a beautiful ribbon bow? You must do the following:

Measure the required length and cut the desired piece. It is better to take the material with a margin so that it is sure to be enough, and the tails of the bow are long and graceful, and not microscopic and sticking out in different directions.
Remove everything superfluous from the table and lay out the tape on it (you can do this on the floor or bed - this does not matter, the main thing is that you have a flat surface in front of you, not cluttered with foreign objects).
Unfold it and lay it out in front of you. If there is such a need - iron it with an iron.
Cross the ends of the ribbon in the center to properly tie the satin ribbon bow. If you did it right, you should end up with two even droplets of the same size. This will be the ears.
Before taking the next step, carefully check the dimensions of the parts so that one half does not turn out to be larger than the other. Do the same measurements with the ponytails - they should also be perfectly the same (unless, of course, you conceived the concept of a bow with ends of different lengths).
Now we cross the droplets, while laying them on top of each other.
Wrap the left eye around the right and pass through the loop that appeared in the central part.

Tighten the resulting knot tightly so that it does not come loose at the most inopportune moment. Correct each part of it - and that's it, our decoration is ready!

Fork help!

If you want to make a small beautiful bow from a thin ribbon, it is very convenient to use auxiliary items when creating it. Since it is quite difficult to tie it by hand, the most ordinary fork will come in handy for this purpose.

This cutlery, which is in any home, will help you make even the smallest beautiful ribbon bow. You can independently adjust the size of the future product by increasing the width of the teeth with cardboard. To make a beautiful bow with a fork, you must follow these steps:

Unfold the tape and wrap it around the appliance.
Make a twist with one end and pull it under the ribbon between the middle tines of the fork.
Pick up this end on the opposite side. This way you wind the entire plug.
Pass the same part of the tape in the upper zone, stretch it to the front of the cutlery.
On the one hand, you have a loop that so far does not need to be touched.
Continue working with the same tip. Wrap it around to the right and slide it through the bottom part into the loop.

Now tighten the resulting composition, carefully remove it from the fork - and that's it, the miniature bow is ready.

Wire won't hurt either.

Another useful assistant when creating bows is floral wire. With its help, you can make both classic single-tiered and lush crafts.

For gifts, bouquets, hair ornaments, clothes and interior decor - you can use this ribbon bow anywhere. The master class on its creation is extremely simple:

Cut the tape to the length you need.
Lay it out on a flat surface and smooth it out.
Bend the material on both sides and cross the tips in the central part. Lay them on top of each other. This way you will form the ears of the future bow. Do not forget that their ends should hang freely in the form of ponytails.
Hold the resulting composition in the central part so that all its elements remain in place.
In the middle, wrap the workpiece tightly with wire.
Cover the connection with a piece of tape of the same color or goes well with the main one. Fix with glue or sew with thread.
Tidy up the ears and tails, adjusting them and spreading them symmetrically.

So we make a beautiful ribbon bow. Feel free to use it for any decorative purposes.

Two in one

If you want to make a simple bow, but not with two ears, but with four, folded in two layers, you do not need to cut out each element separately. To create this craft, as in the case of a regular bow, you also need one complete ribbon.

This jewelry is perfect for decorating gifts, as well as for decorating hairstyles and any other type of decor. So, let's get down to business.

Cut off a large piece of tape and lay it out in front of you.
Bend the first loop, then the second. Do not let the central part out of your hands so that the composition does not fall apart. If you find it difficult to hold the tape and work with it at the same time, ask someone to help you until you learn how to do it yourself. When you get the hang of working with the tape, you can make multi-level decorations in this way, but for now it is better to limit yourself to a two-layer craft.
Cut off the excess parts of the tape, and drag the rest in the center with a wire or sew with a thread.
Wrap the center part with a matching tape so that the fixing point is not visible. Secure it with glue or sew it on too.

You've made a beautiful two-layer bow. Now you can hook it wherever your heart desires!

Making a curvaceous bow

To make a beautiful bow from a wide ribbon, it is best to use material along the edges of which a wire is stretched. In this case, it will be much more convenient for you to give the decoration a shape and volume. This craft is perfect for gift boxes.

For a medium-sized presentation, you will need the following materials:

about 2 meters of tape;
glue gun;
double sided tape.

So, your actions in order to make a beautiful ribbon bow:

Wrap the box in gift paper;
Cut off the desired amount of ribbon and wrap it around the present.
Fix the future bow on the box with glue. In this case, you can not cut the ends of the tape, as you will need them for further creativity.
Bend one end of the material to make a loop. Glue the resulting drop to the box in the central part.
Fold the loop several times to create folds from it. Each of them is a separate ear of the future bow.
Fasten the loops together and glue them to the package.
Similarly, you can make even more of these drops and fix them on the box.
Follow the same steps to create the second half of the bow.
Use scissors to trim the hanging ponytails.

To hide the place of fixation of all elements in the center of the craft, cover it with a separate piece of fabric.

Finishing the ends of the tape

When creating any bow, each of its elements plays a very important role. Not only the ears of the craft, but also its ponytails should look neat and symmetrical.

When we tie a bow from a satin ribbon (or any other), we need to ensure that its hanging ends are as long as possible. You can shorten them at any time, but to increase them without untying the loops is extremely difficult and virtually impossible.

To make the bow look neat, you need to cut the ends of the ribbon correctly. Thanks to this, the material will not crumble, you will remove excess threads sticking out of the edges, and the whole appearance products will become much more presentable.

For best results, use sharp scissors that won't chew through the fabric. To trim the tips, you can choose one of the two most common methods:

Diagonally: Run the scissors over the tape at any angle you like.
V-shape: find a point in the center of the ribbon near its end, mark it with a pencil or pen, cut two lines coming from the corners of the tail towards it. If the triangle you cut didn't come off the fabric on its own, carefully peel it off where it's still attached.

Choosing additional decorations

Finishing the ends can be the last step on how to tie a beautiful ribbon bow, unless you want to decorate it with extra trinkets. Depending on the occasion, your tastes and the content of the gift, these can be a variety of elements.

For example, a bow for a New Year's present can be decorated with a small decorative snowflake, bell, Santa Claus. Rhinestones, beads, flowers, stars, hearts, etc. are suitable for crafts for a hairpin or clothes.

We decorate wisely!

In any needlework store you can find a lot of suitable parts. They can be attached not only to the ribbon itself, but also to the wrapper next to it, if we are talking about presentations.

When choosing additional elements for a bow, it is very important not to overdo it. It's better to just tie a beautiful ribbon bow and decorate it with one cute trinket than to wrap it around with a bunch of all sorts of decorations, which together will look cheap and tasteless. Create with wisdom and inspiration. And you will definitely succeed!

Bow decorations are used everywhere: clothes, gifts, decor, accessories. Therefore, the topic of how to make a bow from a ribbon is so relevant. Today we will learn how to tie the main types of bows, and also try to create original accessories in the form of hats, wedding decorations, jewelry.

How to make a ribbon bow? Learning to tie in basic techniques

So, an accessory in the form of a bow can be the perfect touch that completes the ensemble in clothes, gift wrapping, jewelry making, etc. It can be placed anywhere in the product: on the side, behind, above or below. Such a stroke will attract attention, make the product more spectacular.
As you know, bows are tied in different ways, so before considering how to make a bow from ribbons to create decorations, we will learn how to tie them using the most common techniques.

Classics of the genre or tying in the classical technique.

A bow made in several layers (multilayer).

Strict. Differs in restrained lines, has a minimum of decor.

From two tapes of different widths. It is also called bicolor.

A sophisticated version of a strict bow or better known as Dior.

Bulk flower.

How to make a ribbon bow for hair jewelry?

Making a hair accessory with a few pieces of ribbon is pretty easy. Products are made from satin stripes different forms, sizes. The step-by-step instructions below will help you complete this task quickly and without difficulty.

How to make a ribbon bow for a regular hairpin?

Initially prepare the ribbons:

three of the same size;
one longer for elongated ends;
one shorter for a twist in the center.

You will also need a hairpin, singeing candle, transparent glue.

From three identical ribbons we make a blank according to the technique of making a strict bow.
Fold two of the blanks, as shown in the photo, fasten together.
Pull the third workpiece in the center.
From the longest section, fold the design in the classical technique, but instead of tying it, tie it in the center with a thread.
From the smallest piece, make a wrapped part to wrap the middle. Shrink the edges of the workpiece (the manufacturing principle is visible in the photo), singe.
Collect hairpin:

workpiece tightened in the center;
two-piece blank;
bow according to the principle of classical technique.

Wrap in the middle, fasten the decor on the hairpin.

How to make a flower bow on a hairpin from a ribbon?

For such decoration of hairpins, you must have:

two ribbons of the same color, 5 cm wide and 2.5 cm wide;
metallic ribbon in silver or gold color;
a needle and thread;
a candle or a lighter for burning the edges;
glue (transparent);
scissors.

Cut six pieces of the widest tape. They should be 14–16 cm. Use fire to process the edges and sew with a flower, as in the photo.
Perform the same actions with the second ribbon of the main color, the only difference is the length of the cuts should be 10–12 cm.
From metallized, cut into six strips of 15-17 cm and 8-10 cm. Roll them up like petals, solder with fire.
Assemble the flower by gluing it with transparent glue:

largest base flower;
large metallic petals;
second flower;
small metallic petals.

Decorate inside, you can use a bead or a decorative stone for this purpose.
After the flower is attached, the elastic band or hairpin (clip) is ready. You can use such a flower to decorate elastic bands or hoops on your head.

Rose decoration with a bow on a hair bun?

For work you need:

5 cm satin strip;
tweezers;
scissors;
needle with thread;
candle.

The work is done like this:

Fold the cut in half, and bend the corner down, as in the photo below. This is done so that the edge does not stick out of the flower.
Using tweezers, twist the beginning of the rose.
We fasten the bud with threads. When twisting, form edges and sew each branch with thread.
Singe the back of the resulting rose.
In this way, twist five flower blanks.
Stick them on the base, and tie an original bow at the bottom, making it in a classic style.

Video lesson: a special tie with bows for weaving into a braid?

Photo: design of all kinds of hair accessories with satin bows stripes

How to make a ribbon bow for wedding paraphernalia?

Recently, more and more often hand-made paraphernalia is used at weddings, and this is not only decoration of the hall. Ribbons are actively used to make bracelets for bridesmaids, boutonnieres decorating guests, and even a garter for the bride is made from them.

Bow bracelet for bridesmaids, how to tie?

In order to tie a similar bracelet, bridesmaids will need:

two ribbons of the same color, their width should be 5 cm and 1.2 cm;
matches, a candle or a lighter;
decorative elements;
transparent glue.

The bracelet for the bridesmaids is made like this:

Cut off a piece of a wide satin strip, singe the edges.
Tie the ribbon in the classical technique, but do not tighten the central knot too much.
Insert a narrow tie through it, with the help of which, the decoration will be attached to the arm.
Tighten the knot tightly and decorate the top.

How to make a boutonniere from ribbons?

You should prepare:

two ribbons of different colors, 5 cm and 1.2 cm wide (in our version, it is red and white);
scissors;
transparent glue;
pin;
candle or lighter;
decor in the form of a flower, stone or bead.

The boutonniere is made as follows:

From the ribbons, tie two classic bows.
Glue them one to one, as in the photo.
Carefully trim the edges, singe them.
Decorate the middle with a flower. It can be glued or fixed with wire.
Attach a pin and you're done!

Ribbon garter with a bow decor, how to make it yourself?

In order to make one of the main attributes of a wedding - a garter, you need to stock up not only with patience, we are preparing:

under the base: a satin ribbon, at least 5 cm wide;
for decoration: ribbons from 1.2 cm to 2.5 cm.
wide elastic band;
pin;
decor;
thread with a needle.

It is quite simple to perform a garter, for this:

Make a “pouch” from a satin strip under the base. Sew the edges. Do not save on the cut, as a large number of folds only decorate the final version of the product.
Pull a wide elastic band into the resulting workpiece with a pin.
Sew the ends of the elastic and garter.
From thinner ribbons, make bows in a classic design, as in the photo.
Sew them to the garter.
Decorate with decor. You can use beads, rhinestones, sequins, all kinds of flowers, etc.

Video lesson: how to make elegant glasses for newlyweds?

Photo: design options for wedding paraphernalia

How to make a ribbon bow for making jewelry?

Tape is a versatile material from which you can create anything. Many do not believe this statement, so I want to prove the opposite and demonstrate how ribbon bows turn into really exquisite jewelry for all occasions.

Step-by-step execution of an exclusive brooch

We make an exclusive brooch. To create it, you need to acquire:

ribbons from satin, rapeseed and other materials. They should be of different colors, sizes, widths;
scissors;
a needle and thread;
for singeing the edges, with a candle or a lighter;
a pin for a brooch;
transparent glue;
decorative elements.

Now let's talk about the stages of work:

How to create a necklace with a bow?

For work it is necessary to prepare:

a ribbon, the type of necklace depends on its width;
large beads 8-16 pieces.

The work is as follows:

Tie a knot at the cut.
Put on a bead.
Next, another knot, bead, and so on until the beads run out.
Tie the ribbon in a classic bow, as shown in the photo below.

Do-it-yourself frill making master class

For such decoration you need to have:

two satin stripes of this width: one with a pattern - 5 cm, the second rapeseed white - 2.5 cm;
transparent glue;
scissors;
decorative element - a pebble or a bead.

The work is carried out in the following stages:

Cut three strips of 18 cm rapeseed ribbon, fold them as in the photo, glue.
Cut 6 colored cuts of 8 cm.
Wrap loops of them, fold into a bow-base.
On top of the colored loops, stick two white ones. How it is done in the photo below.
Now we take up the manufacture of the lower part. The basis is a rapeseed cut. It should be 22 cm.
Starting from the bottom, glue two rapeseed loops on it at an angle.
Glue a colored loop on top and repeat 4 times. The photo shows how it should look.
The last to be glued is a white rapeseed loop.
Glue the bottom and top (which was made in advance) parts.
Glue decor on top. For fastening, you can use a pin or ribbon-tie.

Video master class for making bow earrings

Photo: DIY jewelry options

Now you are convinced that knowing how to make a ribbon bow you can make a lot of unique, beautiful accessories and other embellishments. Experiment and surprise others with exclusive products.