Rose is the most delicate, vulnerable and beautiful flower. The rose is called the "queen of flowers". This is the color of love, tenderness, femininity and grace. The rose is the most dramatic flower. No one can resist the magic of the beauty of these flowers. No man can resist the desire to give his beloved these flowers - roses. Making a paper rose is quite simple if you follow the simple instructions in the picture diagram.
Origami pattern: Rose from a piece of paper
(Click on the image to enlarge the picture)
1. Fold a square piece of paper in half.
2. Fold the resulting rectangle in half again.
3. Open the part indicated by the arrow and smooth it out.
4. Turn the product over.
5. Open the part indicated by the arrow and smooth it out.
6. Fold the bottom corners towards the center line.
7. Open the part indicated by the arrows and level it.
8. Fold along the dotted lines.
9. Turn the product over.
10. Now on this side do the same as in pictures 6 - 8.
11. Fold to form a crease and unfold back.
12. Fold and unfold.
13. Align as shown in the picture.
14. Turn over.
15. Can stand.
16. Open the part indicated by the arrows, then fold.
17. Insert 4 fingers into the center of the square as shown in the picture.
18. Roll three or four times.
19. Roll three or four times clockwise on your fingertips as shown in the picture.
20. Eight petals are folded.
21. The beautiful rose is ready!
- Method I - the simplest
- Method II
- Method III
- Method IV
- Method V
- DIY corrugated rose
- Origami rose Kawasaki (video)
- How to make a rose from a napkin (video)
- Origami rose from a napkin (video)
- How to make paper flowers
The rose is, without a doubt, one of the most beautiful flowers in the world, which is why it is very popular.
A paper rose is no less attractive than a real one, and the fact that you make a beautiful flower with your own hands, makes the rose even more meaningful to the person you give it to.
Learn making a paper rose is not difficult. There are many ways to do this, and you will learn about several from us.
You will spend very little time on the rose in this example, but will get a lot of pleasure. Such flowers can be used as decor in an apartment or as a symbolic handmade gift.
You will need:
- thick paper
- scissors
- beautiful vase
1. From thick paper you need to cut out a square measuring 10x10 cm.
*The color of the paper depends on the color of the rose you will be making.
3. Cut out the drawn spiral.
4. Start rolling the paper spiral starting from the outer end.
5. Screw the bud tightly to the end and glue the inner end to strengthen the structure.
The rose is ready, and you need to start making leaves for it.
To make the rose look more chic, place it in a beautiful vase.
How to make a paper rose. Method II
You will need:
- thick paper
- scissors
- glue (adhesive tape)
1. Fold a sheet of A4 paper in half, and then in half again.
2. Now you need to cut the sheet into 4 strips. To do this, unfold it and cut along the folds.
3. Use duct tape to hold the cut strips end-to-end together, creating one long strip.
4. The strip that you have obtained needs to be twisted so that you get a rod-trunk (see picture).
5. You now need to fold the remaining part of the paper in half, while slowly turning it around the center (see picture). Continue wrapping and gathering layers until you have a rose.
*If you wish, you can paint the rose with your favorite color if you made it from white paper.
How to make a rose. Method III
You will need:
- crepe paper (red and green)
- stick, skewer or wire
- pencil
- scissors
- floral tape or glue
1. Make a heart shaped template. The size of the template depends on the size of the flower. In this example, the height of the heart is 15 cm.
2. Cut out 5-6 hearts according to the template.
3. Making a stem. Prepare 3 wires or a stick and wrap it with floral tape.
* Floral tape can be replaced with glue.
4. Making petals. Gently stretch the paper wide. Wrap the top edge of the heart around the round handle.
Wrap the first petal around the stem and secure it with ribbon.
Do the same with the remaining petals.
5. Making leaves. Prepare 3 wires and wrap them in crepe paper. Next you need to glue the leaves to them, which must be prepared in advance.
6. Making a rose cup. Cut a strip of green crepe paper.
Attach the strip to the base of the cup using adhesive tape (you can replace it with glue).
Attach the leaves to the stem. Make one common stem and decorate it with green crepe paper.
Paper rose. Method IV
You will need:
— template for printing
- Printer
- scissors
- stick, toothpick, skewer or wire
- pencil
1. To make such a paper rose you need to download a flower template
Scheme of how to make a rose
2. After which you printed out the template, cut out the petals and leaves.
* Take a close look at the template, where all the petals and leaves are numbered.
3. Use scissors to bend the ends of the petals on both sides.
4. Three green leaves also need to be bent in half lengthwise.
5. Prepare a toothpick, thin wire, stick or skewer and twist petal number 1 around it. Use glue to secure everything.
6. Now around twisted petal number 1 you need to wrap petals number 2 and 3 and also secure with glue.
7. You need to glue petals 4, 5, 6, 7 together to make something similar to cones (see photo).
8. Collect and glue all the parts of the flower together!
You can find roses in other colors by clicking on the links below.
1. Pink color
2. Pale pink color
3. White color
4. Pale yellow color
DIY paper roses. Method V
Like the previous roses, this one can be made in any color. The example shows the color red.
1. Prepare colored cardboard. Draw a spiral on it. Try to make the line that you draw from the center to the periphery not even, but a little wavy.
2. Using scissors, make a cut along the entire drawn line. You should get something similar to the peel of a peeled apple.
3. Now you need to wrap your spiral around your pencil. Try to wrap tightly until you reach the middle. After this, you need to remove the pencil and let the flower straighten out.
* Using your fingers, you can try to slightly bend the paper petals in the central part.
DIY corrugated rose
You will need:
- corrugated paper (pink and green)
- scissors
- wire (straightened paperclip or skewer)
1. Prepare pink or red corrugated paper and fold it several times, first lengthwise and then widthwise.
2. Using scissors, cut out what looks like double petals, shaped like hearts. In this way, you can make 8 petals at once with one cutout.
* In the video, the petals are simply cut out of paper, but you can first draw them on it and then cut them out.
4. Now you need to cut a strip 3 cm wide from a roll of corrugated paper (choose the length yourself, based on the video tutorial). Apply glue along the strip.
5. You need to put a short length of wire at one end of the tape (you can replace it with a straightened paperclip or skewer) and wrap the entire strip around it. This way you will get the core of the rose. It is to this that you will further glue the petals.
6. All that remains is to apply glue to the petals and attach them to the central part.
7. At the final stage, you need to make leaves from green paper. To do this, fold the green crepe paper in half and half again, and cut the shape of the petals as shown in the video.
* In the video, a foam rubber strip is pressed against the wire, and then green paper is wrapped around the wire along with the foam rubber.
Origami rose Kawasaki (video)
This method of making a paper rose was invented by Kawasaki, after whom it is named.
How to make a rose from a napkin (video)
Origami rose from a napkin (video)
Paper origami Exquisite ROSE - a paper flower, a sign of special treatment and love! This flower is for a wonderful mood for Mom, on March 8 or another holiday! I will tell you in detail how to make a rose out of paper in this video. Don't miss the details! Check out my other #origami master classes #gamejulia: ORIGAMI FLOWERS https://goo.gl/FG7W0O ORIGAMI JEWELRY https://goo.gl/RjsniH ❤ Let's be friends ❤ VKontakte - https://vk.com/gamejulia Subscription - https ://goo.gl/qC9siv Instagram - https://www.instagram.com/gamejulia/
Many people are interested in how to make a rose from origami paper. This craft can be used to decorate a wrapped gift for a birthday, Valentine's Day, or March 8th. You can make a bouquet of artificial flowers and put them in a vase, or use several origami roses to create a three-dimensional panel for room decor. And besides, in the process of such work you will calm your nerves, experience beauty and learn something new. It is also recommended to involve children in such creativity. This develops perseverance, attentiveness, accuracy, spatial thinking and fine motor skills of the fingers, which is useful for the development of the speech apparatus. This joint activity brings children and adults closer together.
What is origami?
Origami is the ancient Japanese art of folding all kinds of paper figures without the help of scissors and glue. The technique has its roots in Ancient China, where paper was invented. For a long time, this type of applied art was available only to the upper classes. It was considered good form to master the technique of folding paper figures.
Important! Paper cranes are believed to bring good luck and fulfillment of wishes.
Now origami is widespread all over the world, and it has the following features:
- It can be simple and modular (the figure is assembled from several, sometimes numerous parts).
- There are also different techniques for this art - wet folding, folding according to a pattern (a drawing with designated folds).
- Typically, a square sheet of paper is used to fold origami figures.
- To preserve the shape of a complex model for a long time, they came up with the idea of using paper impregnated with adhesive, that is, the origami technique is being improved every day.
- The most popular figures are those that are easy to create - tulip, frog, crane, fox, boat, heart. You can learn from them. There are many more complex models that will require more time, patience and skill.
Schemes for origami can be easily found on the Internet. We will focus on how to create a paper rose using the origami technique.
Important! Rose is one of the most beautiful and popular flowers. It is a symbol of beauty and femininity, although in different countries this flower has different meanings. It can be considered a symbol of wisdom, pride and even mystery.
To create a paper rose, there are several simpler and more complex techniques. In both cases, you will receive a beautiful craft that can be used for decoration.
How to make a rose from origami paper? Scheme for beginners
Using this pattern, you can make origami roses with your children, it’s not difficult.
Required material:
- If square sheets of paper are usually used for origami models, then in this case take a sheet of A4 colored paper. Color - your choice (red, pink, cream, yellow, burgundy or any other).
- Also prepare scissors and PVA glue (you can use stationery glue).
Procedure:
- We cut the sheet into strips 1 cm wide. We cut along the long side.
- Take a strip and bend the tip so that a corner comes out. Having retreated a little, we bend it again, then again.
- We take this curved tip and roll it into a tube with our fingers. This turned out to be the middle of the bud.
- To form the flower, we continue to bend the paper tape into the corners, and then twist it around the middle.
- The tip is discreetly fixed to the flower with glue. You have a small rose flower. This rose can be attached to a skewer to create a flower on a stem.
Important! If you want a larger size, you can cut the strips wider, but then in order for the strips to be long enough to form a beautiful bud, they need to be glued together.
- Wrap the skewer in green decorative tape or green paper.
Important! Several of these roses can be placed in a small vase. Origami rosebuds can be used to decorate panels, photo frames, gifts, and homemade postcards. The rose itself can be decorated with various sparkles or sequins. Thus, it will look even more impressive.
For those who are interested in how to make a rose from origami paper for the first time, the pattern for beginners is quite suitable.
How to make a paper rose? More advanced origami
This scheme is a more complex process than the one described above. However, a flower made using this technique looks more natural and beautiful.
Required material:
- Colored double-sided paper, red or any other color.
- Scissors.
Procedure:
- Cut a square measuring 10x10 cm from a colored sheet of paper.
- Fold the sheet in half. Now cut in half again.
- Flatten the top into a triangle. Turn it over and fold the workpiece into a triangle on this side in the same way.
- Bend the right and left corners upward in the shape of a diamond.
- Bend these corners in half downwards and return to their original position.
- Lay out the small triangles that make up the rhombus into squares.
- Bend the resulting pockets in half downward. Turn the workpiece over and bend it on the other side in the same way. You will end up with a pentagon with a large angle on top.
- On the resulting figure, bend the large corner down in half and return to its original position.
- Open the lower part of the figure like a book.
- Pull the inner part of the resulting “book” to the sides by the middle and flatten it. You will get a square with two triangles inside.
- Turn the workpiece over and pull the triangle up.
- Bend the lower right square diagonally from top to bottom.
- Rotate the workpiece 180 degrees, and similarly make bends at the lower right square.
- Place the resulting figure in your left palm, and with your right hand, grab the center and carefully turn clockwise until a rosebud is formed.
Important! The corners of the petals can be slightly curled using a pencil.
How to make a rose out of paper? Origami modular
We suggest trying another, medium-complexity scheme for creating a paper rose. But this is already an example of modular origami, when a figure is assembled from several elements.
Necessary materials:
- Double-sided colored paper.
- Scissors.
- Stationery glue.
Procedure:
- Prepare 8 squares from double-sided colored paper. The result will be a rose made of two layers.
Important! If you want a fuller bud, cut 15 squares, then the flower will consist of three layers.
- Take a square and bend it in half. Turn back.
- Turn the square clockwise to create a diamond shape. Bend the right corner along the fold line inward.
- Fold the left corner in the same way.
- Use a pencil to curl the corner a little. The base of the first petal is ready.
- Using the same pattern, make three petals from which the first row is assembled.
- Collect them. To do this, apply a drop of glue to the left corner of one petal and the right corner of the next. You should end up with three module petals glued together in a circle.
- For the second row, prepare 5 petals in the same way. Glue it together. First at the bottom, then turn it over and glue it at the top. We connect the petals in a circle again.
Important! If you have an origami rose of three tiers, and you have prepared 15 squares, make the third row of 7 petal modules in the same way, and glue them into a circle in the same way.
- Now insert the blanks one into the other to make a rosebud.
Important! For beauty, you can make tiers of petals from different shades - red, pink or any other paper. Decorate the rose with sparkles.
Rose Kawasaki
Origami master Toshikazu Kawasaki is known throughout the world. thanks to its very realistic models. Not everyone can replicate his masterpieces, even using ready-made designs. One of his most famous and beloved figures is the rose. She is so beautiful that she looks like the real thing. This origami model is called “Kawasaki Rose”.
It is quite difficult to repeat the creation of this rose, following only verbal instructions, so check each step with the illustrations, or even watch the video tutorial. There is not only a special technique for folding paper, but also all kinds of rotations of the workpiece.
Preparatory work:
- As always in classic origami, you will need a square of paper. For the rose, of course, take double-sided paper in red, pink, cream, or any other color of your choice.
- Unlike previous options, when making such a rose, you first need to make all the necessary folds on the paper on both sides, and then fold the flower according to the instructions.
- Some origamists use paper clips to fix kinks during work. So, just in case, stock up on them.
So, how to make a rose from origami paper using the technology of master Toshikazu Kawasaki?
Procedure:
- Take a square and fold it in half, then in half again, and again. We do the same on the other side. When you open your square, you will get 8 vertical and 8 horizontal stripes.
- Now fold it in half diagonally, and in half 3 more times. Likewise, on the other side. As a result, when turning, 16 diagonal stripes will appear in one and the other direction.
- We bend the corners along the second diagonal line. There will be 4 vertical stripes between the folds.
- Now we fold the workpiece along the diagonal bends, but leaving a square with a diagonal recess in the center.
- If everything is folded correctly, then this figure folds into a kind of hexagon with a slightly twisted center (which is a square folded diagonally).
- Place the long side up and bend the top right flap towards you along the fold line.
- We unfold the workpiece. An octagon should emerge, with a rhombus in its center, with an inflection extending from each corner. A bit like a propeller.
Important! To fix the center so that it is convenient to further collect the flower, you can strengthen this central diamond with a piece of tape.
- We turn the workpiece over and begin to bend all the corners one by one in one direction, according to the fold lines, giving the figure volume. At this stage of work, you can already notice the outlines of a rosebud.
- The most difficult part will be the design of the petals. To do this, bend one of the corners, unfold it, and then bend it inward. After folding, bend this part in the opposite direction along the fold lines of the small triangle.
- We repeat these steps similarly for the remaining rose petals.
- Next, we put the edges of the petals into the pocket of the adjacent petal.
- After all the manipulations, there is a hole left at the bottom of the flower. We remove it by gently pressing on the bud on the sides and bottom. As a result, you will receive a closed flower bud.
- To open it, use a pencil to squeeze out the core of the rose.
- Now we decorate the side petals, slightly bending the double, then the single part of the corner. We repeat the algorithm of actions with other petals.
If you acted strictly according to the scheme, checking the illustrations, then the result should be a gorgeous Kawasaki rose, which will decorate any composition. It can be supplemented with a stem and petals.
Rose from napkins
To decorate your holiday table, you can twist several roses from paper napkins. This is not quite origami, but it also looks original.
Procedure:
- You need to take a pink table napkin and fold a 4 cm strip towards you.
- Now turn it over to the other side so that the folded strip is on the side.
- Next, pinch the edge of this strip between your index and middle fingers and begin to tightly wrap the napkin around them.
- Fold the corner of the napkin down.
- With your other hand, grab the middle of the bundle and begin to slowly pull it down, twisting it into a flagellum. Do not twist the very end - this corner needs to be bent upward so that a leaf on a twisted stem comes out.
- Now twist the stem tightly to the very bottom.
- All that remains is to fluff the rosebud and bend the corner a little to give it a more natural look.
Video material
To make a beautiful paper rose using the origami technique, you will need a little time, patience and perseverance. However, your efforts will not be in vain. Such flowers, especially if they are made according to more complex patterns, look simply excellent and can decorate a wide variety of objects. Use the action algorithms presented in this article. You may not get the first product right, but with each new attempt the flower will be more realistic.
The art of folding paper crafts without using scissors and glue is called origami. It came to us from Japan and quickly gained popularity. The technique of folding paper figures can be learned by both adults and young children. The most popular is the origami paper rose.
The popularity of the paper rose is associated with the widespread love for this flower. With a similar craft, you can decorate a postcard or photo frame, or make a beautiful colorful panel that will give you a good mood in the cold winter. From several roses you can weave a wreath for your daughter’s holiday, or make a bouquet or composition for interior decoration.
In order to understand exactly how to make a rose from origami paper, you need to study the diagrams. For beginner paper craft lovers, there are instructions on how to make a rose or other flowers step by step. So, before you make origami from paper flowers or roses, you need to prepare the following materials:
- Office, corrugated, crepe, colored or white paper. The main requirement is the ability to keep its shape and not tear when bent.
- Schemes (for classic origami).
- When working in pattern technology, use ready-made diagrams and printed drawings. It is best if these drawings are printed on a color printer.
- Pencil, scissors, PVA glue to secure the product. Wire for twigs or dry tree branches.
First models
The simplest model is a rose made using the paper rolling technique. A beautiful flower is made quickly, even a small child can assemble this craft. Let's look at how to make a rose step by step.
Step one.
Fold the corrugated paper into several layers.
Step two.
Cut off two corners on one side of the resulting ribbon. Make a cut in the shape of a petal.
Step three.
The resulting blank can be screwed onto a pencil or twisted by hand.
Step four.
Secure the rosette at the base with tape or glue.
Origami paper rose is one of the most popular crafts all over the world. It is done quickly according to the presented scheme:
Take a standard A4 sheet of paper. Cut into even strips. The width of the strip depends on the desired size of the rose. Usually, paper 1 - 1.5 cm wide is taken. Paper strips must be folded diagonally. You can create several roses from one sheet. Decorate the finished flower with rhinestones or glitter varnish.
The resulting flowers can decorate a gift box, or you can make a beautiful bouquet if the buds are connected with wire wrapped in green paper.
Origami paper rose for beginners and patterns are widely presented in a variety of master classes. The technique of folding according to a pattern, that is, a ready-made drawing, is very convenient for getting acquainted with origami. For those who are just mastering paper crafts, folding according to a pattern will help to correctly assemble the desired figure and instill the skills of folding a paper product.
Available rose models
After mastering paper rose origami step by step, novice craftswomen move on to more complex schemes for creating everyone’s favorite flower. Fresh flowers, unfortunately, are short-lived. To add individuality to the interior, they often resort to decorating with paper and flower arrangements. Such compositions look beautiful.
Creating beautiful crafts with your own hands is not only a useful leisure activity, but also an expression of creativity. The origami rose ranks first in popularity among handmade paper flowers. The colorful flowers are fairly easy to make if you follow the step-by-step instructions. The result of the work is visible after a short period of time.
The colors of roses have always impressed with their diversity, so you can use any color for crafts. Most often, paper leaves measuring 10 x 10 cm are used for roses. The result is a medium-sized flower.
You can assemble the following rose model in about 10 minutes, following the diagram:
- The square sheet is folded in half. Fold the resulting rectangle in half.
- Carefully open the upper side of the resulting square from left to right to form a triangle. Turn the workpiece over and repeat all the steps on the reverse side. There should be a triangle of workpiece in front of you.
- In the resulting triangle, fold the lower corners of the upper part of the workpiece towards the center line. You've got small triangles. Open them so that a square comes out.
- Turn the workpiece over.
- Bend the lower sides of the upper triangle symmetrically towards the center line.
- Bend the resulting upper corner towards the center point of the bottom line of the triangle, straightening it.
Now carefully follow the presented schematic instructions:
Do not take thick paper for the first attempt; it is better to take soft corrugated paper or a set of colored school paper. Until you learn how to tightly fix the folds of the craft, soft material is best suited for creativity.
The rosette is assembled according to the pattern according to the finished drawing, where the fold lines are specially marked. Solid lines are the fold of the valley, broken lines are the folds of the mountain. Print the finished diagram on a color printer or transfer it to colored paper using tracing paper.
Here is a step-by-step collection of roses using a pattern.
Step one.
Fold the diagram like an accordion, fix the lines, and then unfold the sheet.
Step two.
Fold the triangles inward along the marked lines.
Step three.
Along the folds of the mountain, the triangles must be folded down.
Step four.
Fold rows of triangles along the auxiliary lines until you have collected all the triangles.
Step five.
After the entire paper figure has been assembled, carefully open the resulting triangles using a pencil or scissors.
As a result, you will create a magnificent flower:
Rose - cube
The most unusual origami rose model. The rosette can be transformed into a cube or the cube can be transformed into a beautiful flower. A very beautiful original gift. For the craft, you need to prepare 3 square sheets of green and red flowers. The flower may be pink or yellow. This cube looks beautiful with the contrast of colors.
Usually it takes about 30 minutes to create such a gift transformer. For those who are trying to make such a craft for the first time, the main thing is to understand the scheme for creating a rose-cube. Speed will come after several assembled products. If you follow the assembly rules, you will get an excellent cube rose.
This craft is assembled from six separate modules: 3 green and 3 red. To work, you need sheets measuring 10 x 10 cm. First, we assemble the modules.
Step one.
The square sheet is folded in the middle. A line is formed. Unfold the sheet. We bend the opposite edges of the sheet towards the middle and again form a line. You will end up with something like this:
Step two.
We form new fold lines. Fold the lower right corner up to the top fold line. We do the same with the opposite corner of the sheet.
Step three.
Fold the right corner underneath, aligning the edge of the sheet with the visible vertical fold. Fold one fold to the right. Following the fold line, align the bottom of the corner.
Step four.
Turn the workpiece over. Do the same operations with the opposite direction angle.
Step five.
Turn the workpiece over again and bend the corners of the module.
Step six.
We form a square by bending the corners on both sides.
Make 2 more modules this way. Set the finished 3 red cube blanks aside.
- Take green leaves. We repeat steps 1 to 5 inclusive without changes.
- We bend the upper corner on the right as in the picture.
- Turn the workpiece, then bend the corner in the same order as in the red workpiece.
- The modules have holes where you need to insert a long corner. First, we assemble 3 modules of the same color, then the second, after which we connect the two halves of the cube.
- To turn a neat little cube into a rose, you need to follow these steps: pull out the short green corners and unfold them. This is how rose petals are made.
- To form a rose bud, pull out the bottom corner from the fold on three sides. The upper corners extended in the same way will add splendor and volume to the rose.
The wonderful kusudama ball made of individual modules also belongs to easy origami models. This craft is made from many simple origami roses fastened together. Many craftswomen love such products for the opportunity to show their imagination, surprise others, and decorate the interior of their home.
To assemble the modules, in addition to paper, you will need glue and 6 paper sheets. Modules can be the same color or can be combined from 2-3 harmonious shades. A kusudama ball is assembled from several roses. The flowers are carefully glued together with side leaves. Such a ball can be hung on a Christmas tree or decorated with several flower balls in a children's room.
Rose Kawasaki
A beautiful classic Kawasaki rose is assembled by experienced craftsmen without any diagrams. For beginning craftswomen, this flower is quite complicated, but the resulting result will justify the time spent.
The most difficult thing when creating this product is the formation of folds. You can find ready-made drawings and assemble a flower according to a pattern, however, many people prefer to make this model themselves. Before you start working, you need to familiarize yourself with several master classes and watch video tutorials that show you step by step the process of creating a delightful beauty.
Be sure to familiarize yourself with the folding technique. Try to form mountain folds and valley folds on separate sheets. This skill is very useful in creative origami works.
The Kawasaki rose is the closest thing to a real living flower.
Karina is a regular expert on the PupsFull portal. She writes articles about games, pregnancy, parenting and learning, child care and the health of mother and child.
Articles written
Origami rose flower is one of the most popular paper origami. If you don’t know how to make an origami rose flower, then on this page you will find everything you need to assemble this simple paper figurine.
In the first photo you can see what you will get if you follow the assembly diagram below. The second photo of an origami rose flower was taken by one of our site users. He got a classic rose and paper. Having learned to collect such a flower, you can always surprise the people close to you. If you have photos of origami you have collected, send them to: This email address is being protected from spambots. You must have JavaScript enabled to view it.
Assembly diagram
Below is a diagram of assembling an origami rose flower from the famous Japanese origami master Fumiaki Shingu. If you strictly follow the instructions, then assembling the origami rose flower will not take much time, and the result will be the same as in the picture. After doing what is described in the diagram several times, you will understand how to make origami rose flowers quickly and without looking at the diagram.
Video master class
Assembling an origami rose flower may seem like a daunting task for beginners. Therefore, we advise you to enter the query “origami flower rose video” on the largest video hosting site on the Internet, YouTube. There you will find many different videos about origami rose flowers, which clearly show the steps to assemble a rose flower. We hope that after watching the assembly master class video, you will have no more questions about how to make an origami rose flower.
Here is another easy video that will teach you how to make an origami rose flower:
And here is another simple instructional video on assembling a rose flower from paper:
Symbolism
The rose flower is the most popular flower, the queen of flowers, a symbol of beauty and grace. The rose flower acts primarily as a symbol of love and tenderness. At the same time, this is a complex image that symbolizes both earthly passion and heavenly perfection.
